Pair of EndCaps for Yakima CoreBar.
Tensioning handle for FrontLoader universal bike mount. Includes one handle.
Pair of EndCaps for Yakima JetStream bars.
Includes a single SKS key.
Chainstraps for a multitude of rear of car bike racks.
Spare part for SideWinder
Yakima Load Bar End Caps. - For 86" load bars only
Replacement red tensioning knob for Frontloader
SKS stands for "Same Key System." These types of cores enable you to lock all your Yakima products with just one key. When replacing a core on your Yakima product, you may need a Control key to remove your existing unlocked core so you can transfer the core to a different Yakima product.
Use these adapters to attach the LockNLoad platform directly to the Yakima TimberLine and SkyLine towers. They eliminate the need for a traditional crossbar, and put the platform lower and closer to the roof-giving your rig a clean, customized look. One pair of LockNLoad SL Adapters required for each pair of towers. Check your vehicle fit to verify requirements Product Details: - Sold as a set of 2 adapters with included hardware to attach to 2 Yakima TimberLine or SkyLine towers (towers sold separately). - Structural steel brackets with powder-coat finish for durability and resistance to the elements. - The LockNLoad platform requires 2 or 3 sets of adapters (check your vehicle's and platform's fit requirements for number of adapters needed). - Only compatible with Yakima SkyLine and TimberLine towers. - Each set of adapters adds 110 lbs. of weight capacity, up to 330 lbs., when used with 3 sets of adapters and towers. Never exceed the Yakima-specified weight limit for your vehicle. Product Specs: - Weight: 0.50 lbs - Some assembly required, 60 minute install
These durable, easy to install felt pads are custom shaped for SweetRoll and HullHound and provide additional protection for your boat. Sold as pairs.
The LongArm Pad provides some extra protection when hauling gear on Yakima's LongArm truck bed extender. The pad combines durability and protection with a soft foam core and a ballistic nylon exterior that holds up over time. Hook and loop closures are designed to hug the LongArm’s crossbar tight and a center cutout allows side or centered placement. Sold as a single pad. PRODUCT DETAILS - Foam padding protects boats and other cargo from damage -Durable, ballistic nylon construction - Look and loop closures and 28” length perfectly fit around the LongArm crossbar - Center cutout allows side or centered placement on crossbar - Sold as a single pad TECHNICAL SPECS - Weight: 0.50 lbs - Dimensions: L 28.00in x W 3.00in x H 3.00in
Take your HighSpeed or HighRoad bike mount to the next level with the SmarT-Slot Kit 1. This hardware kit replaces the standard mounting hardware to enable direct attachment of your bike mount into a T-slot channel on your crossbar. It works with Yakima JetStream crossbars as well as most other T-slot crossbars on the market. PRODUCT DETAILS - Includes T-slot hardware, covers, and install tool. - Designed to work exclusively with Yakima HighSpeed and HighRoad bike mounts. - Compatible with Yakima JetStream bars and most other T-slot style crossbars. TECHNICAL SPECS - Weight: 0.25 lbs
Lock housing for Q Towers. Includes 4 lock housings. SKS lock cores not included (sold separately).
The SkyHook gear hangers easily mount to your SkyRise rooftop tent to keep you organized at your campground. The simple to use carabiners slide into the SideTrack on the outside edge of the SkyRise floor to keep gear at an arm's length and off the ground. Sold in packs of four, each carabiner is supported with a nylon strap rated to handle up to 50 pounds. Jackets and wet towels, day packs and dry bags - whatever it is, the SkyHooks have got you covered. Product Details: - Hanging storage hooks for the SkyRise tent keep your camping gear organized - Slides into the SideTrack on the outside edge of the SkyRise base and hangs down below the tent floor to easily hold camping necessities - Yakima carbine attachment hook is secure, strong, and easy to use - Strong, durable nylon strap attached to each carabiner can support 50 pounds of gear - Sold as a pack of four Product Specs: - Weight: 0.48 lbs - Dimensions: L 6.00" x W 1.60" x H 0.50"
Add the SmarT-Slot Kit 5 to the TopWater box for an even sleeker profile on T-Slot Crossbars. This easy hardware kit replaces the standard mounting hardware, and directly attaches into a T-slot channel on your crossbars. It works with all Yakima T-slot crossbars as well as most other T-slot crossbars. Product Details: - T-slot hardware kit for the TopWater rooftop fishing rod box. - Includes T-slot hardware, covers, and an install tool. - Compatible with all Yakima T-slot crossbars and most other T-slot crossbars. Product Specs: - Weight: 0.12 lbs - Dimensions: L 0.75in x W 0.75in x H 1.60in
$44.99 - $54.99
A tough, dependable tie down, the SoftStrap delivers strength and protection. Durable webbing secures the load, a neoprene cover protects boats, coolers and vehicles, and an integrated hook and loop cover stashes excess strap so it’s not flapping in the breeze. Product Details - Long 8 to 16-foot tie down secures kayaks and larger gear - Neoprene cover protects boats, gear and vehicle - Integrated hook and loop cover makes it easy to stash excess strap - Sold as a pair - Combine with our Aero Crossbar Pads for an easy to use surf setup
Yakima's ArmLock cable lock is compatible with their DoubleDown Ace rack (sold separately). It integrates into the rack, stowing in the rack's arm when the lock is not in use. And, you simply pull it out and wrap it around the outside bike and lock it to safeguard your bikes on the rack.
Our versatile new Eye Bolts integrate seamlessly with our Truck Collection HD Bars, and most T-slot crossbars, to create instant tie-down points for securing gear. Made Yakima-smart, they’re secure, strong and easy to install—just drop them into the slot and twist into place. Product Details: - Rugged steel construction with durable black corrosion resistant finish for many years of use - Includes hardware for both HD Bar and standard T-slot crossbars - Handles up to 250 lbs. on our HD Bars, and up to 165 lbs. on Yakima JetStream, FlushBar and RailBar crossbars - Set of two Product Specs: - Weight: 0.50 lbs - Dimensions: L 1.75in x W 0.75in x H 2.12in
Horizontal MightyMounts are simple attachments that make gear-specific Yakima mounts compatible with most factory car rack systems.
If it floats and fits on crossbars, these Crossbar Pads will help protect it. - Goes great with kayak stackers, heavy-duty straps, and strapthang
Bar adapter that allows you to run RoundBar on StreamLine Towers.
Yakima SKS (Same Key System) Lock Cores secure all lockable Yakima rack systems, cargo boxes, and accessories. It's your gear, keep it that way. - Fits all lockable accessories - Includes 2 SKS Cores and matching keys - 2 keys included plus a control key
Yakima's 1 1/4-Inch Hitch Adapter makes a 2-inch hitch bike carrier compatible with 1 1/4-inch hitch receivers.
$59.99 - $74.99
Tailor your towers – these super-strong clips come in a wide range of sizes and designs so you can precisely fit your BaseLine Towers to your car’s bare roof.
Our nose/tail tie-down system for stand-up paddleboards and other board styles. Because the long boards need some love too, especially the long ones - our S.U.P. Brah provide some extra security for these. -Extra security for even the longest boards -They work with most styles of surf and paddleboards, but can also be used on a variety of watercrafts that lack the tie down points for additional security -Pair them up with lockable Yakima RipCords or Heavy Duty Straps to carry your boards safely to the beach -Our S.U.P. Brah is sold separately or included as a component of the WaveHog
Make backing up your Yakima RackandRoll trailer a cinch with this 40-inch tall, bright yellow fiberglass pole. It increases the visibility of the rear of your trailer for you and others on the road. Attaches to your trailer frame or crossbar easily.
A straight-forward, easy-to-use, locking QR skewer that fits any fork-style bike mount on the market. Compatible with any 9mm x 100mm axles. - Durable stainless steel axle and body - Easy-to-adjust end nut and cam lever - Lockable with SKS lock, sold separately
A locking QR skewer for Fat Bikes with 9mm x 135mm axles. Includes a locking skewer with sleeve for use with HighSpeed and additional adapters for ForkChop. Product Details - Durable stainless steel axle and body - Easy to adjust end nut and cam lever - Lockable with a SKS lock, sold separately - Includes 9mm x 135mm threaded adapters for Yakima ForkChop - Includes 135mm sleeve for use on Yakima HighSpeed Product Specs - Weight: 1.15 lbs - Dimensions: L 9.50" x W 3.50" x H 1.25"
For tried-and-true security, our new HD Hook Straps deliver maximum strength with a proven hook attachment to easily hold larger cargo in place. Designed to work with Yakima EyeBolts and integrated attachment points on our OverHaul HD, OutPost HD and HD Bar, they also work great with other tie-down points. These straps are quick and easy to adjust—load and go! - Our proven Heavy-Duty Straps with durable, vinyl-coated hooks - Easily attach to our EyeBolts, or other tie-down points, for a secure hold - 10-ft. length handles a wide range of gear and supplies - Set of two - Weight: 1.00 lbs - Some assembly required
Page 1 of 7 Next page