NEW! Blue groomers and fresh powder, the FreshTrack 6 is the perfect mount for loading the crew and finding first tracks. Wide enough for four boards or six pairs of skis, simple to mount on virtually any roof rack, no tools needed, and super easy to use, it's great for quick getaways and dawn patrol starts. One-button access allows gloves-on operation, and the built-in SKS locks secure your gear. Product Details - Easily carries six pairs of skis up to 120mm wide at the tip - or four snowboards - Tool-free clamp design makes install and removal a breeze - Universal mounting system works with round, square, factory, and most aerodynamic roof racks - Includes SkiLift attachment to provide clearance for tall bindings - Integrated SKS (Same Key System) locks included for added security Product Specs - Weight: 9.90 lbs - Dimensions: L 35.00" x W 5.75" x H 7.25" Installation Details - Some Assembly Required - Tool-Free Install - 25 Minute Install
Our burliest crossbar ever, the HD Bar is the one for heavy loads, rugged terrain and maximum utility. It delivers the muscle our new truck racks demand, and works with our StreamLine towers to get the heavy-duty job done right. The engineered aluminum construction provides superior support without weighing things down, integrated tie-down points to simplify load security, and T-slot attachment technology for adding gear mounts the fast, easy way. The Yakima Way. Product Details: - Strong, lightweight aluminum construction handles heavy loads great for rooftop tents - Integrated tie-down points on endcaps make it easy to secure gear - T-slots top and bottom to easily add Yakima and compatible gear mounts - Includes rubber infill for top T-slot for load protection and wind noise reduction - Built to last and look good doing it with a durable black powder-coat finish - Compatible with all StreamLine towers with our new HD Bar SL Adapter (sold separately #8003541) - Available in variety of lengths 55"/60"/68"/78" to create custom set-ups
If you're serious about the great outdoors, check out Yakima's Outdoorsman 300. This great rack adds serious space to your pickup — no drilling necessary. The Outdoorsman clamps to the truck bed and provides a heavy-duty support that handles up to 300 pounds. Plus, it leaves your truck free for other gear haulin' duties.
Secure your bikes with Saris' Kool Rack 2-Bike. Hydraulic pressure holds the rack in place while valve limits protect your truck bed walls. Its pivoting rubber pads grip most surfaces, including bedliners. No drilling is required. The Kool Rack comes with two fork mounts—additional mounts can be added (sold separately). Besides holding bikes, the Kool Rack can be used to secure cargo from sliding around the pick-up bed.
Yakima's new premium fork mount, the low-profile HighSpeed, is streamlined, strong, and versatile. It easily transports mountain, road, and fat-tire bikes and fits both quick release and thru axles. Bikes are secured using the new and easy-to-use TorqueRight knob for a precise and stronghold. The sleek and stylish HighSpeed tray is designed for maximum hatch clearance. Optional SKS Locks (2) can be added to secure your bike and the mount to your vehicle. - Securely carries a variety of bikes including road, mountain and up to 5” fat-tire bikes. - Seamlessly carries both quick release (9 mm) and thru axle bikes (12 mm, 15 mm, 20 mm). - New TorqueRight knob quickly and easily secures the bike with precision. - Sleek, low profile tray minimizes hatch interference and accomodates tires up to 5” wide. - Tool-free, universal mounting hardware fits most roof racks - Easily convert to integrate with T-Slot crossbars with the addition of a SmarT-Slot Kit (sold separately). - Add SKS Locks (2) to the included TailWhip cable to secure your bike and mount to your roof rack (sold separately). - Carry quick release 9 x 135 mm fat bike with the Optional Fat Bike Adapter Kit(sold separately). TECHNICAL SPECS - Weight: 20.00 lbs - Dimensions: L 22.00” x W 22.00” x H 5.00”
Amp up the utility of your LockNLoad platform rack with this set of versatile, heavy-duty aluminum perimeter rails to help secure and tie down your load. The rails also feature a convenient side channel for mounting Yakima T-slot attachments. Each kit includes a pair of front/rear rails, and a pair of side rails that easily install in the channels along the perimeter and inner slats on the platform. Designed and thoroughly tested in the rugged Australian Outback to meet Yakima's new Off-Road Rated standards. Product Details: - Loads can be secured, braced against, and/or tied down to perimeter rails. - Integrated T-slot in the perimeter rails makes it easy to attach your Yakima T-slot accessories. - Sold in sets of 4 rails (2X right/left side rails and 2X front/rear rails). - Available in 6 sizes to match LockNLoad platform sizes. - Heavy-duty hardware features a durable black-zinc coating. - Designed and thoroughly tested in the rugged Australian Outback to meet Yakima's new Off-Road Rated standards. - Fits most other T-slot equipped platforms (please verify your platform's size and compatibility before purchase). - Easily installs in minutes. - Weight: 15.40 lbs - Dimensions: L 37.00in x W 1.50in x H 3.50in
Convert the standard tongue on your Yakima RackandRoll trailer to allow for longer boats. - Adds three feet onto the tongue of any Yakima RackandRoll trailer - Allows you to carry up to a single 22 ft. boat or two 21 ft. boats, depending on the vehicle hitch and boat positions
Thule's Spare Me rack bolts onto the mount for your spare tire and securely carries two bicycles (total weight up to 75 pounds). It has Thule's Stay-Put cradles that protect your bikes and boasts an anti-sway design to keep your bikes from swinging together or hitting your vehicle. The arms fold down when not in use. An integrated locking cable and locking knob make it easy to secure bikes to the carrier and the carrier to the vehicle.
$299.99 - $324.99
The Yakima FlushBar has a signature look that seamlessly integrates with the shape of your modern vehicle. This crossbar with integrated towers has no bar overhang, so your vehicle will look like it came from the factory with FlushBars already installed. The FlushBar shape maximizes strength, while minimizing drag and reducing noise levels to nearly zero. It accepts almost all Yakima mounts and cargo boxes for adaptable, multi-sport versatility. A complete system consists of two FlushBars and a Yakima Fitting Kit. Please consult www.yakima.com to determine which Yakima Fitting Kit and which FlushBar sizes are required for your specific vehicle. Product Details: - Tower is integrated with the crossbar for a sleek, seamless appearance - WindRidge on the leading edge of the crossbar reduces noise and decreases drag - JetTruss internal support engineering adds serious strength for minimal weight - Patented SmartFill technology allows for easy install of T-slot style mounts, such as the Yakima HighSpeed with SmarT-Slot Kit 1 - Compatible with almost all Yakima mounts and cargo boxes. Consult Yakima's Fit My Vehicle Guide for a detailed list. - Anchors to your rooftop with vehicle specific Yakima fitting kits (sold separately). Consult Yakima's Fit My Vehicle Guide to determine which Yakima Fitting Kit is required for your vehicle. - Easily locks to your vehicle with Yakima's SKS system (sold separately)
Loading your boat has never been easier than this! Two front and two rear saddles with integrated rollers will have you and your friends on the water in no time. The spring-loaded base automatically adjusts to boat when loading. - Mounts to any bar type without tools, making installation a cinch. easy loading Fully assembled out of the box - Tool-free installation Fits Yakima round, square, factory and aerodynamic bars Spring-loaded base automatically adjusts to boat when loading - Smooth molded pad hugs and protects multiple boat types - Tilting paddle technology to accommodate an array of boats and roof rack systems - Includes Heavy-Duty Straps and Bow/Stern Tie-Downs - SKS Locks sold separately - Supports one boat up to 80 lbs Minimum crossbar spreads of 24\u001D or more
$279.99 - $309.99
The Yakima RailBar is the premium crossbar choice for vehicles with factory-equipped raised siderails. This crossbar with integrated and easy-to-use towers has no bar overhang, so your vehicle will have a clean, modern aesthetic, looking like it came from the factory with the RailBars already installed. The sleek low-profile shape of the crossbar and its seamless integration to your vehicle’s siderails maximizes strength, while minimizing drag and reducing noise levels to nearly zero. It accepts almost all of Yakima's mounts and cargo boxes for adaptable, multi-sport versatility. A complete system consists of two RailBars. Consult Yakima's Fit My Vehicle Guide (www.yakima.com) to determine which RailBar sizes are required for your specific vehicle. Product details: - Tower is integrated with the crossbar for a sleek, seamless appearance - WindRidge on the leading edge of the crossbar reduces noise and decreases drag - JetTruss internal support engineering adds serious strength for minimal weight - Patented SmartFill technology allows for easy install of T-slot style mounts, such as the Yakima HighSpeed with SmarT-Slot Kit 1 - Compatible with almost all Yakima mounts and cargo boxes - Anchors to your rooftop with vehicle specific Yakima fitting kits (sold separately). Consult Yakima's Fit My Vehicle Guide to determine which Yakima Fitting Kit is required for your vehicle. - Easily locks to you vehicle with our SKS system (sold separately)
What happens when you take the most popular trunk rack of all time and expand its vehicle compatibility by 20%? Spoiler Alert: you get the Bones EX. Cultivated in the mind of Italian designer Fabio Pedrini and brought to life in our Wisconsin-based facility, the Bones EX features a unique and game-changing leg. Featuring a leg that gracefully avoids contact with most plastic spoilers found on many of the best-selling sedans, hatch backs and SUVs, the Bones EX now fits 20% more vehicles than its legendary predecessor. And that’s not all. We’ve decked out the Bones EX with premium bike hold downs and a handy strap management system in a shade that never goes out of style. Product Features - Best fit around: fits 89% of the top vehicles sold, including those with spoilers. - VIP Treatment: premium bike hold downs that are easy to use and quick to load. - Clean, Sleek Look: integrated strap management eliminates flapping straps. - Strong & Rust-Free: injection-molded arms and legs keep the rack solid for years to come. - Carries 3 bikes (35lb/bike). - Has the largest vehicle compatibility of any trunk rack on the market – consult the Saris Fit Guide for approved fits. - Unique dog leg fits over most spoilers, including those on popular sedans, hatchbacks and SUVs. - Premium bike hold downs that are easy to use and quick to load. - Integrated strap management system provides clean look and eliminates flapping straps. - Best-in-class ratchet straps speedily fasten bike to the rack. - Strongest frame on the market. - Built with 100% recyclable materials. - Rust-free injection molded plastic. - Articulated rubber feet to protect paint. - Arc–based design separates bikes on different levels. - Patents issued and pending. - Lightweight at 11 lbs.
Carry 2 bikes in the bed of your pick-up truck with no bolting or drilling with this integrated locking fork mount carrier Features -Aluminum telescoping bar with SoftGrip™ rubber feet hold carrier on side rails of full size and small pick-up trucks without drilling (compatible with most bedliners) -3 One-Key lock cylinders included to lock the bikes to the carrier and the carrier to the truck. -Fits full size and small pick-up beds (compatible with most bed liners) -Carries 2 bikes. More bikes can be fit with the Bed-Rider Add On Block (#BRLB, sold separately)
Thule's ThruRide roof-mounted bike carrier makes it easy to mount almost any bike with a thru-axle fork—no adapters needed. The ThruRide fits forks with 12-20mm thru-axles on anything from fat bikes to XC race rockets to downhill rigs. To load your bike, simply remove the front wheel and re-install the thru-axle into the fork. Lift the bike into the rack, and close the convenient one-handed clamp down on the axle. Then, dial down the clamping pressure to give your bike a secure ride. The ThruRide also works with traditional 9mm quick release forks using an adapter (535SKR sold separately). The rear of the rack is crafted from Thule's aerodynamic "D" shaped low-profile tray. And, tool-free universal mounting makes the ThruRide easy to install on Thule rack systems, as well as round bars and most factory racks.
Step up to the completely new Yakima bar. Thoroughly wind tunnel tested, the black JetStream’s JetFlow design is exceptionally aerodynamic, incredibly strong, lightweight, and really quiet on the move. The root of a modern rack system, it carries a lot and looks good doing it. - Wind tunnel tested JetFlow™ teardrop shape is strong, quiet and exceptionally aerodynamic - Seamless extruded aluminum construction is light, strong and sleek - JetTruss™ internal support engineering adds serious strength - Materials and construction create a durable bar designed for years of use - T-slot with SmartFill™ push-down infill for easy mount attachment and efficient airflow - JetStream Black - powder-coated alloy finish and high-gloss polymer end caps - JetStream Silver - clear anodized alloy finish and high-gloss polymer end caps - Available in 3 sizes; SM (50”), MD (60”) and LG (70”)
Thule's AeroBlade Edge (Flush Mount) is an integrated foot/load bar with a low-profile, aerodynamic design for vehicles without a factory rack. The AeroBlade bars use BoxBeam construction, making them some of the strongest load bars on the market with a capacity of up to 165 pounds. In addition to their wing-like shape, the AeroBlades sport a textured surface that greatly improves wind flow so you get drastically reduced noise and much better gas mileage. These flush-mount feet will need a fit kit for your specific vehicle (sold separately).
Thule's AeroBlade Edge is an integrated foot/load bar with a low-profile, aerodynamic design for vehicles with a factory roof rack. The AeroBlade bars use BoxBeam construction, making them some of the strongest load bars on the market with a capacity of up to 165 pounds. In addition to their wing-like shape, the AeroBlades sport a textured surface that greatly improves wind flow so you get drastically reduced noise and much better gas mileage. The feet fit your vehicle's roof rails without a fit kit and they're T-track compatible as well.
No longer will you have to decide between the turkey fryer, pop up tent, folding love seat, chef kitchen, dog tent, and a 128 capacity cooler. The Xtender adds 21 inches to the Vagabond X and comes with burly load bars for all your other toys. Leave nothing behind. - Comes with 2 load bars - Adds 21" to your Vagabond X - 160lb total load capacity - Makes Vagabond X 41" x 73" x 7" - Load bars measure 44"
Upright bike carrier for the quickest, most convenient mounting – for bikes up to 44 lbs. - 2 One Key lock cylinders (sold separately) lock the bike to carrier and carrier to rack. - Mounts to all Thule rack systems, round bars and most factory racks - Automatically positions your bike when you secure it, thanks to the uniquely designed frame holder and wheel tray - Quick and easy bike securing – the torque limiter dial controls the force going into the bike frame with a clear sign of correct mounting - Pressure is spread via large, soft claw pads that adapt to your bike’s frame tubes – minimizing the risk of frame damage - Safe mounting – your bike is prevented from falling thanks to the claw’s extended lower jaw - Stable wheels – firmly fixed in smartly designed wheel holders with diagonal quick-release wheel straps - Easy, tool-free interface for switching carrier from one side of your car to the other.
Yakima's Q-Towers are the rock-solid foundation for your Yakima roof rack (for vehicles without factory roof racks). The Q-Towers automatically adjust to fit your vehicle's roof contours and they have die-cast components that securely hold the crossbars (sold separately). Plus, they hold fast and safely to your roof with rubber pads that protect your vehicle's finish.
Thule's Insta-Gater turns your truck bed into a stable, secure bike carrier. It mounts without tools because it's ingeniously held firmly in place by closing your truck's tailgate on the ends of the mounting straps. This unique bike rack accepts one bicycle with 20- to 29-inch wheels and up to 3-inch-wide tires. It's also easy and fast to mount your bike thanks to Thule's SecureHook that holds the bike by grabbing the front wheel. No frame contact is made. You can use more Insta-Gaters to carry more bikes.
Premium aerodynamic load bars for an exceptionally quiet ride and easy installation of accessories. 2-pack. - Load bar for Thule Evo roof rack system - WindDiffuser technology disturbs airflow to reduce noise and drag for improved fuel economy - TrailEdge design reduces aerodynamic drag by allowing clean air separation from bar - SmartSlides slidable length scale doubles as an under-bar aerodynamic cover, providing quick, no-hassle rack installation - SwingBlade end cap pivots open to allow full access to the T-slot for easy accessory installs - Upper T-track with QuickAccess interface allows smooth installation and removal of accessories - BoxBeam internal structure creates an exceptionally strong load bar - Check the Thule Buyer's Guide for your vehicle's recommended bar length - 118cm / 47 in
The OffGrid Extension adds 40% more capacity to your OffGrid cargo basket. Installation is easy - just plug it in, tighten it down, load it up, and hit the road. At 18" long, it frees you to bring another cooler, a box of firewood, or a couple more duffels. Fits Medium OffGrid only. Product Details - Extension for the Medium OffGrid cargo basket - Adds 18” in length - Made from durable, steel for years of rugged use - Simple installation with plug-in design - Compatible with Medium OffGrid basket only Product Specs - Weight: 12.50 lbs - Dimensions: L 18.00" x W 40.00"x H 7.00"
Thule's Foot Packs are the "feet" that attach to your vehicle's roof and allow you to then add Thule crossbars (also called "loadbars"), plus the Thule bicycle mounts and accessories required to carry all your gear (crossbars, mounts and accessories sold separately). All mount without tools, are vinyl-coated so they can't damage your vehicle, and are engineered to hold fast under all conditions. They have wide bases for excellent support no matter how many bicycles you carry, and most are sealed from the elements to protect the internal mechanism.
$239.99 - $259.99
Combining modern aerodynamics with old-school muscle, the new CoreBar is the first aero bar built with roll-formed steel’s strength, utility and durability. The JetFlow design is wind-tunnel tested to reduce drag for less wind noise and better fuel economy, and the galvanized steel delivers proven load-bearing performance. - Wind tunnel tested JetFlow teardrop shape is strong, quiet and exceptionally aerodynamic - Roll-formed galvanized steel holds the load - Sleek aerodynamic design looks awesome on your car’s roof - Vinyl wrapped for durability and corrosion resistance - Includes CoreBar SL Adapter to integrate with all StreamLine System Towers - Available in 4 sizes: SM (50”),MD (60”), LG (70”) and XL (80”)
NEW! Perfect for family weekends or ditching work on a powder day, FreshTrack 4 is made for loading up and finding first tracks. Wide enough for a couple of boards or four pairs of skis, simple to mount on virtually any roof rack, no tools needed, and super easy to use, it's great for fresh powder and blue groomers. One-button access allows gloves-on operation, and the built-in SKS locks secure your gear. Product Details - Easily carries four pairs of skis up to 120mm wide at the tip or two snowboards - Tool-free clamp design makes install and removal a breeze - Universal mounting system works with round, square, factory, and most aerodynamic roof racks - Includes SkiLift attachment to provide clearance for tall bindings - Integrated SKS (Same Key System) locks included for added security Product Specs - Weight: 7.94 lbs - Dimensions: L 25.25" x W 5.75" x H 7.25" Installation Details - Some assembly required - Tool-Free Install - 25 minute install
This low-profile custom-install solution delivers up to a 220-lb. load capacity. It's a great choice for most any naked roof vehicle with a roof ditch. Combine with SkyLine Towers and any Yakima crossbars to create a roof rack system ready for a wide selection of gear mounts, including a roof top tent. Product Details: - Permanent installation into the roof ditch for up to a 220-lb. load rating. - Designed for use with our SkyLine towers paired with any Yakima crossbar. - Yakima's patented Landing Pad design for quick and easy tower installation and removal. - Includes snap-on covers for when the rack is removed. - Choice of two pad shapes lets you create the perfect fit. - Stainless steel rivets for superior strength. - Includes four Landing Pads and necessary hardware (see instructions for required list of tools) - Vehicle must have compatible roof ditch for proper instillation (see instructions for fit parameters) - Some assembly required,10 minute install Product Specs: - Weight: 2.57 lbs - Dimensions: L 7.00in x W 2.00in x H 1.50in
Thule's AeroBlade Load Bars are the strong, silent type. Using a sophisticated BoxBeam construction, they're some of the strongest load bars on the market with a capacity of up to 165 pounds. That's the strong, now for the silent: In addition to their wing-like shape, the AeroBlades sport a textured surface that greatly improves wind flow so you get drastically reduced noise and much better gas mileage. The bars are easy to use, too, thanks to Thule's SmartSlide sytem that makes installation hassle free and their SwingBlade technology that allows full access to the T-slot for easy accessory additions.
Choose Thule’s OutRide for a sleek, lightweight, and convenient fork mount carrier with a professional look and feel. - Fits 9mm QR axles - Rear wheel is firmly secured, thanks to the quick release wheel strap - Locks the bike to the bike rack and the bike rack to the vehicle with Thule One Key locks (locks sold separately) - Fits all bikes with up to a 3"-wide tire - Stylized aluminum wheel tray - T-track and around the bar compatible out of the box - Fits Thule AeroBlade, AeroBlade Edge, SquareBar, and most aftermarket racks
Weather resistant storage space that attaches quickly and easily to most vehicles, with or without roof racks. - Adds an additional 16 cubic ft. of storage.