Electra Accessories

These baseplates are the foundation that keeps Chris King headsets turning with legendary smoothness. Manufactured from high-quality stainless steel or titanium, Chris King makes replacement baseplates for all standard sizes and a number of ingenious solutions for those that need something a little special to make their headset work. - Engineered and manufactured in Portland, Oregon USA - High-quality stainless steel and titanium baseplates available for all standard Chris King headset sizes - Titanium baseplates are available in 1-inch and 1 1/8-inch sizes only - Devolution baseplates are a stainless steel solution that allow King headsets to adapt to a wide variety of steerer tube sizes - King Stainless Steel baseplates are available in undersized and oversized versions for irregular steerer tube sizes - 30.0mm ID/40.5mm OD for post-April 1995 1-1/8" Headsets - 30.0mm ID/44.0mm OD for pre- April 1995 1-1/8" Headsets

Why We Make This: The simple answer is that many contemporary bicycle frame designs call for the headset bearings to ride inside the frame’s headtube. After decades of making press-in bearing headsets, we needed to make headsets that worked in these newer frames. From the beginning we understood that integrated headsets posed a unique challenge in that the bearings are not pressed into a cup and sit loosely in the frame. When bearings are not pressed securely into a cup they shift and move, rapidly losing preload. As preload drops, the bearings are more susceptible to creaking, damage, and failure. That’s a problem we know how to solve. Why You Want It: Enter, our patented GripLock™ bearing cap. The GripLock™ preloads the headset independently of clamping onto the steerer, so it retains preload far better than the competition and is impervious to the ill effects of load spikes from large hits and heavy braking. This means smoother steering, no more creaking, and a longer lasting headset. Our GripLock™ design also takes the guesswork out of preloading a headset, because the bearing preload force is independent of the clamping force. Our headsets can be preloaded to a torque spec. Compatible with Open, 3T, All City, Low, Cinelli, Lynskey, and more. - Engineered, manufactured and assembled in Portland, Oregon USA - King Lifetime Warranty - Legendary made-in-house bearings - Patented GripLock® retention design for dependable headset adjustment (US Patent 8662517) - 42mm 45x45 upper bearing for 2.8-3.0mm bearing ream depth. - 52mm 45x45 lower bearing - Compatible with our included baseplate and 45 degree integrated crown races

Why We Make It We build bearings, so we build bottom brackets. The humble threaded bottom bracket is often the first part installed on a new frame, and the last one the rider thinks about during the life of the bike, but the bottom bracket has a direct effect on pedaling efficiency (read: speed). This is where you put your power into the bike. Having the absolute best interface between your effort and your bike’s forward momentum makes your ride better. The Threadfit™ 30 is how we make bikes that take 30mm cranks the best they can be. Why You Want It ThreadFit™ 30 fits 30mm and DUB spindle cranks in BSA bottom bracket shells. Our ThreadFit™ 30 bottom bracket is silky smooth and long-lasting thanks to our legendary, angular-contact bearings, both steel and ceramic, the best in the industry. They actually get faster over time as their contact surfaces wear, because we build them to ultra-tight aerospace tolerances, using machined, Delrin-spindle sleeves to create a perfect, and precise fit between cranks and frame. That’s where the low drag and butter smooth feel come from. You want this bottom bracket because it offers super low drag. You want this bottom bracket, because it can be opened, cleaned and repacked for years of faithful service. You want this bottom bracket, because you don’t want to think an awful lot about your bottom bracket. Our Threadfit™ 30 bottom brackets come in an array of beautifully anodized colors and each one includes a Fit Kit that allows it to be used with a wide selection of road and mountain bike cranks. The Fit Kit for our ThreadFit™ 30 with 30mm spindle cranks is available here. The Fit Kit for DUB cranks is available here. ThreadFit 30 comes with a Center Sleeve for 73mm BB shell. For 68mm shell - sleeve PBB082 is required(included in Fit Kit #2 for DUB Road cranks). - Engineered, manufactured and assembled in Portland, Oregon USA - King Lifetime Warranty - Legendary made-in-house bearings - Available in 8 beautifully anodized colors - A Fit Kit is required for use - Ceramic bearing upgrade available - Uses Chris King bottom bracket cup tool for installation

Service your suspension fork with Enduro Seal KIts. - Custom made for each make and model of fork

Shifting performance has helped Full Speed Ahead to become a world leader for high-end chainrings. No one studies the design and manufacturing of each system, and each tooth, as carefully as we do. Our dedication shows in every revolution of the crank, and every perfect shift achieved. To meet or exceed the needs of any drivetrain, Full Speed Ahead has developed sophisticated design, testing and manufacturing protocols. This allows Full Speed Ahead to match your needs as perfectly as our chainrings match a chain. We offer more options, levels, and finishes than our competitors. We use the best materials available, imported from the USA, Europe, or sourced from our qualified vendors in Asia, to guarantee the durability, performance, and appearance will out-perform, and outlast the competition. Full Speed Ahead chainrings have powered multiple World, Tour de France, and Olympic champions, and will exceed your expectations. - Stamped AL7075/T6 - Chainrings are compatible with all 10-speed drivetrains, and compatible with FSA, SRAM, and Shimano 11-speed drivetrains - Drivetrain Speeds: 11, 10

With its unidirectional carbon construction, the SL-K Compact handlebar is ready to race. It features the latest evolution of our compact bar shape, with a shallow 125mm drop and gentle flare. A wide center section gives ample room to mount accessories like GPS units or lights. The areas where the stem and levers clamp have additional reinforcement and a textured finish to avoid slip. - Aerodynamic Integrated Cable Routing (ACR) compatible - Semi-integrated Cable Routing (SCR) compatible - Continuous UD carbon Monocoque construction - Reinforced and textured clamping areas - 120mm wide round center section makes it easy to mount accessories - New internal cable routing options for Di2 - Bar Clamp Diameter: 31.8mm - Bar Reach: 80mm - Cable Routing: Internal - Bar Drop: 125mm - Flare: 4

More versatile than other energy gels Honey Stinger Energy Gels may be consumed straight from the packet before or during activity, spread on toast, stirred into tea, or anything else you can think of. All flavors mix well with water to make a natural energy drink. When to Consume Honey Stinger Gels are optimized for efficient fueling before and during athletic efforts. Gels provide instant, honey-powered energy that lasts, which delays muscle fatigue and gives your body the power to achieve your goals. Acai Pomegranate Resembling our popular Pomegranate Passionfruit Energy Chews in taste; the delicious flavor of Acai Pomegranate will not disappoint. Certified Gluten-Free with organic tapioca syrup, organic honey, added electrolytes and a blend of natural acai and pomegranate flavors, this gel will keep you fueled for any athletic endeavor. Fruit Smoothie What could be better than our Fruit Smoothie Energy Chews? Our great-tasting Fruit Smoothie flavor in gel form. Certified Gluten-Free with organic tapioca syrup, organic honey, added electrolytes and a blend of natural fruit flavors, this gel will keep you fueled for any athletic endeavor. Vanilla Vanilla is one of the most widely used flavors around the world with a mild yet delicious taste, which made it a natural decision to include in our organic gel line. Certified Gluten-Free with organic tapioca syrup, organic honey, added electrolytes and natural vanilla, this gel will keep you fueled for any athletic endeavor. Mango Orange The flavor combination of tropical mangoes and perfectly ripe oranges will keep you energized for all adventures. Certified Gluten-Free with organic tapioca syrup, organic honey, added electrolytes and a blend of natural mango and orange flavors, this gel will keep you fueled for any athletic endeavor.

- Ocarina Torque Wrench Set It's lightweight and smart design. - Tightening force to the correct torque easily, no need to set up the tool between various torque, for 3~10N?m rating. - The ergonomic handle holds 3/4/5/6mm hex keys and T-25 in one tool. - Ideal for all mechanics and avid riders.

Precision brake bleeding tools and adaptor kits for Magura brake systems. - Bleed adaptors fit MT series - Attaches to caliper only

- Class adapted for use on eBike's, motorcycle racing's proven 4-piston technology creates an absolute maximum of braking force. - Motor cut off - HIGO Closer - For E-Bikes up to 45 km/h - Position: Front or Rear - Hydraulic Hose Length: 2200mm - Fluid: Mineral oil - Lever Blade Material: Aluminum

- Clearly defined bite point and maximum power make it the first choice for gravity and high-speed pilots - 1-finger HC lever blade modulates the enormous braking power as desired - Suitable for mounting left or right

- The Storm HC rotor is designed for extreme use and unparalleled braking performance under high braking forces.

Magura Storm SL.2 Rotor - 6-bolt silver The Storm SL.2 disc brake rotor combines minimal weight with excellent braking performance. Perfect for sporty use.

The NiteRider Double Taillight Rack Mount allows for the installation of 2 NiteRider taillights. It attaches securely with the rack mount for that perfect fit. It features a quick release tab on each mounting point that allows you to remove just your taillight, leaving the whole mount installed on the seat post; ideal for when you leave your bike unattended or when it's time for a recharge. SYSTEM COMPATIBILITY - Sentinel - Omega 330 - Solas - Sabre - CherryBomb - TL 5.0 SL - Vmax+ 150 NOT COMPATIBLE WITH Emax+ 150, OMEGA 300, SENTRY AERO 260, AND BULLET 200 TAILLIGHTS

Lumina Micro series delivers high output in a small package, making it great for helmet usage. Features a modular designed lightweight body combined with increased thermal properties ensuring a brighter, longer lasting LED and a newly designed handlebar strap mount with quick-release tab - 4 light levels plus a flash mode - Lumina Micro 900 and 650 include a VMAX+ - Lumens: 650/80 - Run time: up to 50 hrs F/up to 27 hrs R - Weight: 130g/28g

The Swift 300 gives you more than enough lumens at our lightest weight for headlights (82 grams). NiteRider makes this headlight USB rechargeable for convenient on-the-go charging. The Swift 300 features a highly durable light housing with Dupont Fiberglass reinforced nylon meeting all required FL1 Standards for impact testing and water / dust resistance. Vmax+ 150 is NiteRider's first taillight featuring COB (Chip-on-Board) LEDs, which for cyclists means it emits highly visible flash patterns in a smaller, more compact package. Its feather-like light weight makes it perfect as a wearable safety light-easily clipping onto straps, belt loops, and more. SWIFT 300 FRONT LIGHT FEATURES - Lumen Output: 300 - 5 Modes with Run Times: 2:00 – 28:00h - Charge Time: 2:00h at greater than 500mA | 3:15h at 500mA - Water / Dust Resistant IP64 Rated - USB Rechargeable SWIFT 300 TYPICAL RUN TIMES Low—15:00h at 80 Lumens Med—9:00h at 150 Lumens High—2:00h at 300 Lumens Flash—12:00h at 300 Lumens Walk—28:00h at 20 Lumens Vmax+ 150 TAILLIGHT FEATURES - Lumen Output: 150 - 6 Modes with Run Times: 5:30-27:30h - Charge Time: 2:00h - Water / Dust Resistant IP64 Rated - USB-C Rechargeable Vmax+ 150 TYPICAL RUN TIMES Fast Flash—12:45h Slow Flash—10:15h Disco Flash—10:45h Pulse Flash—7:00h High Steady—5:00h Low Steady—27:00h

Purchase our Kid Trailer axle for your bike, and share your stoke for cycling with your kids. Simplify your life by allowing quick and secure attachment of your trailer to your best and favorite bike. Enjoy the adventure. Robert Axles for Kid Trailers are designed specifically to fit your 12mm thru-axle bike and allow attachment of any hitch-mounted trailer. These fit any trailer that has two wheels and a single point of attachment to the axle. This includes all the two-wheeled child, pet, and cargo trailers such as Thule, Chariot, Burley, Instep, Carry Freedom, and many more. - The axle shaft and axle end are precision CNC-machined. - The axle shaft is 7075 aluminum and hard black-anodized for rugged durability. - The stainless steel axle end allows for mounting of the hitch provided with your trailer. - Hardware for attachment of the hitch is included; the hitch, itself, is not. - No special tools required. Design allows for wheel installation and removal using your standard 5mm hex wrench. - Designed, built, and quality tested in the USA. Proven around the world.

Our Trainer Axle is designed to adapt your thru-axle equipped bike to on-wheel trainers, such as a 1up, Blackburn, Cyclops, Kinetic, Tacx, Wahoo, and many others. Our goal is to fit the thru-axle to your bike perfectly to minimize spacers and extra parts, providing a clean, high-performance axle for your bike. Train, warm up, and be race ready and fit for the season.

Bigger and Stronger for a Better Ride Featuring an improved ride feel and more accurate power measurements, this smart bike trainer has everything you need for an enjoyable and efficient indoor training session. - Ride hard. This trainer can handle sprints up to 2,000 watts. - Work up a sweat with inclines up to 16% that hold up to your most serious sprints. - Accuracy matters. Measure your power to within 2.5%. - Keep crushing it with your favorite apps, including Zwift and Tacx. - Finally, a trainer that won’t wake the whole house when you ride hard. ACCURATE AND RELIABLE This trainer is redesigned to let you track your performance and progress with reliable, consistent measurements. That includes power, speed and cadence, measured accurately within 2.5%. READY TO SPRINT The well-balanced design and large footprint of the FLUX 2 Smart trainer ensures maximum stability, even during the most explosive sprints, up to 2,000 watts. CLIMB HIGHER Get the most out of your intense workouts by training on realistically simulated inclines up to a 16% gradient. A MORE REALISTIC RIDE At 16.8 lbs (7.6 kg), a heavy flywheel ensures a realistic ride feel and good responsiveness. SMOOTH AND SILENT This direct-drive trainer is designed to bring vibration and noise levels to the absolute minimum, resulting in one of the most silent flywheel-equipped bike trainers available. IMPROVED COMPATIBILITY The trainer comes with additional axle adapters to significantly improve the axle compatibility. It is compatible with 142x12 mm and 148x12 mm axles — right out of the box. HIGHLY COMPATIBLE The FLUX 2 Smart trainer communicates via BLUETOOTH Smart technology and ANT+ FE-C protocol, so it works with a number of popular training apps such as TrainerRoad and Zwift. ABLE TO STAND ALONE You can opt to use the trainer in stand-alone mode. When not connected, it will simulate a flat road; the faster you ride, the higher the resistance. DEVICE COMPATIBILITY Connect FLUX 2 Smart to multiple devices simultaneously, so you can enjoy Tacx software and track your performance on your Garmin bike computer at the same time. TACX TRAINING SOFTWARE Enjoy a library filled with more than 100 high-quality, real-life videos that let you experience the rush of riding the steep hills of the Alps or the cobblestone roads of Milan. TACX TRAINING PLANS Take advantage of structured training plans, designed for your fitness level to help you meet your goals. Race live opponents, upload GPS data, ride with 3-D maps and more.

Tri-Flow Superior Lubricant is a light viscosity lube that allows for deep penetration into hard to reach moving parts. - Ideal for all conditions - wet, dry, road and trail - High grade petroleum oils provide optimum lubrication under extreme temperatures (-60 to 475F) and humidity

- 10-speed: stainless steel 6.1mm wide no tool chain connector for Shimano and Campagnolo - 9-speed: stainless steel 6.5mm wide no tool chain connector for Wippermann chains - 6-8 speed: stainless steel 6.8mm wide no tool chain connector for Wippermann chains

10-Speed Chains - Extreme Performance Our 10-speed chains are only 2.2 mm wide (internally) and compatible with all 10-speed drive systems. High-grade materials provide long service life and the high-performance plate guarantees outstanding shifting properties. Steel The value-priced steel chain offers all the new design features and convincing gear-changing properties of our new 10-speed series. Connex Link, the tool-free connector, is always included with each of these chains. - Dimensions: 1/2" x 11/128" - Pin length: 5.90mm - Roller width: 2.20mm - Pin ejection pressure: >2000 N - Pin hardening: XHB - Links: 114 - Weight: 264g - For all 10-speed systems Suitable for mountain bike and road bike

Connex S0 chains are made of high strength alloy steel. Their chamfered plate design offer precise, lightning-fast shifting, ideal for both road and MTB riding. - Alloy steel inner and outer link plates - Compatible with Shimano, SRAM and Campagnolo 10 speed drive trains - 5.9mm pin width - Reusable Connex master link included Connex sX chains are nickel plated for durability. Their chamfered plate design offer precise, lightning-fast shifting, ideal for both road and MTB riding. - Stainless steel inner links, alloy steel outer links, both electroless nickel-plated - Compatible with Shimano, SRAM and Campagnolo 10 speed drive trains - 5.9mm pin width - Reusable Connex master link included

9-Speed Chains - Your All-Rounder Our 9-speed chains are compatible with all common road bike, touring bike and mountain bike gear systems. The innovative high-performance plate geometry gives all types of this series the very best gear-changing properties. And for highest resistance to wear and maximum strength, we have implemented an innovative process for radial riveting. Steel Value-priced with top performance: The standard model of the 9-speed chain series is robust and offers top gear-changing properties thanks to the high-performance plates. Always included with all 9-speed chains: the unique Connex Link. - Dimensions: 1/2" x 11/128" - Pin length: 6.60mm - Roller width: 2.20mm - Pin ejection pressure: >2000 N - Pin hardening: XHB - Links: 114 - Weight: 279g - For all 9-speed systems - Suitable for ATB/trekking, city/touring, mountain bike and road bike

Jagwire's Brake or Shift Cable Tips are made of lightweight, corrosion-resistant and durable aluminum and are the right size to nicely fit over the ends of up to 1.8mm-diameter cables. These caps are crimped in place on the cables to prevent fraying and ensure your cables last a long time. The tips come in colors to add a little style to your bike.

Jagwire's Shift Cable Tips are made of lightweight, corrosion-resistant and durable aluminum and are the right size to nicely fit over the ends of shift cables. These caps are crimped in place on the cables to prevent fraying and ensure your cables last a long time. The tips come in Gold and Silver so they also add a little style to your bike. - Each Bottle contains 500 tips

Eurostyle Chamois Butt’r is the most popular chamois cream for cyclists who prefer a soothing cooling formula. It's the lube of choice for many top men and women pro riders. It's a non-greasy skin lubricant that improves your riding comfort by preventing rubbing and chafing. It's safe for use on even the most delicate fabrics and it washes right off the skin and out of shorts easily with soap and water. And, it also helps extend the life of your cycling shorts by restoring the softness and suppleness of both natural and synthetic chamois pads. The single-use packets are just right for taking along on rides or events or giving to friends who need more comfort. The tube or jar is the perfect size for your drawer or gear bag and offers many applications.

Her' Chamois Butt’r was developed by a female sports medicine physician in cooperation with professional women cyclists. It's a non-greasy skin lubricant that improves your riding comfort by preventing rubbing and chafing. Her' utilizes premium ingredients including aloe vera, green tea leaf extract, tea tree oil, shea butter and lavender oil for their naturally occurring beneficial properties. It's safe for use on even the most delicate fabrics and it washes right off the skin and out of shorts easily with soap and water. - To use: rub 1/6 to 1/3 ounce on your skin or chamois - No gluten, paraben, fragrance or artificial color - Meets the FDA’s Good Manufacturing Practices - No animal testing utilized

Chamois Butt’r Original is a non-greasy skin lubricant developed by cyclists for use with all chamois. Chamois Butt’r isn’t just for cyclists! It lubricates, soothes, and softens the skin of all athletes who experience chafing. BENEFITS: - No greasy residue - Immediately improves comfort - Soothes already chafed or irritated skin - Rinses out of clothing and off of skin easily - Won’t damage or discolor technical clothing - No parabens, phthalates, gluten or artificial fragrances - To use: rub 1/6 to 1/3 ounce on your skin or chamois - Meets the FDA’s Good Manufacturing Practices - No animal testing utilized

Replacement threaded cap for Abbey Hanger Alligment Gauge Tool.