The FC System was designed with one thing in mind: to bring together the most compelling details into one all-inclusive hydration system. - Streamlined Storage: New Profile Design FC Hydration Systems were designed with one thing in mind to create a clean front-end solution that thoughtfully integrates hydration, nutrition and electronic needs. Integrated storage streamlines nutrition needs into rear airfoil compartment. - Forward Computer Mount: Computer mount positions perfectly at the front of the system for optimal viewing. - Sealed cartridge bearings - No-Splash Refill Port: Brand new patent-pending refill port shields splash back. - Dual Straw Positioning: Strategically flexible to fit your preferences. A simple turn of the dial positions straw on the right or left side of the bottle. - Convertible Straw: Swap straw with gap cap to place straw in the front or rear of bottle. Specs - Construction: BPA-Free, Foodsafe HDPE Bottle - Capacity: 35oz (1035ml) - Width: 65mm-140mm (center to center) - Weight: 35oz (470g)
HSF / AERIA hydration system is designed to seamlessly integrate with the Aeria Ultimate Stem (Stem is required for installation) - combined with the Aeria Ultimate aerobar, this system provides a fully integrated front end “super bike” solution for any bike. This BTA system features the race proven “no splash” fill port, a straw magnet mount for streamlined aero over the top of the system, a bite valve for fluid control and a removable computer mount. - Construction: BPA-Free, Foodsafe HDPE Bottle - Capacity: 30oz (857ml) - Only Compatible With: Profile Design Aeria Ultimate Stem (70mm or 100mm - ONLY) - Weight: 420g
With the EVOC STAGE 12L you get a compact technical daypack with excellent features. It's the number one pack for those looking to ride their bike with little equipment but uncompromising carrying comfort. Extra convenience comes with the freely moving BRACE LINK that allows the shoulder straps to adapt to the individual shoulder width of the wearer. - Emergency plan (integrated) - Attachment system for: helmet (XC, full face), protection gear (stowable) - Tool compartment (separate, quick-access) - Rain cover (integrated) - Accommodates hydration systems up to 3L (not included) - Volume : 12L
The FC System was designed with one thing in mind: to bring together the most compelling details into one all-inclusive hydration system. - Streamlined Storage: New Profile Design FC Hydration Systems were designed with one thing in mind to create a clean front-end solution that thoughtfully integrates hydration, nutrition and electronic needs. Integrated storage streamlines nutrition needs into rear airfoil compartment. - Forward Computer Mount: Computer mount positions perfectly at the front of the system for optimal viewing. - Sealed cartridge bearings - No-Splash Refill Port: Brand new patent-pending refill port shields splash back. - Dual Straw Positioning: Strategically flexible to fit your preferences. A simple turn of the dial positions straw on the right or left side of the bottle. - Convertible Straw: Swap straw with gap cap to place straw in the front or rear of bottle. Specs - Construction: BPA-Free, Foodsafe HDPE Bottle - Capacity: 25oz (739ml) - Width: 65mm-140mm (center to center) - Weight: 250z (397g)
Ergon’s mid-sized BX3 Pack makes an excellent companion for endurance riders who need to take plenty of food and supplies with them. The expandable cargo area has two compartments for easy organization, and an external helmet retainer for the occasional hike-a-bike or post-ride chill. Its tough rip-stop nylon construction stands up to the rigors of long days on the trail, and the airy, 4-zone open-mesh SpacerFabric provides cooling airflow along your back when the action heats up. You’ll love Ergon’s Adaptive Carrying System, which hugs the pack snugly against your lower back and hips for a secure fit, and an adjustable back panel gives you a custom fit for maximum comfort. There’s even an integrated rain cover for when your ride lasts through varying weather. Plus, sleek waistband pockets provide quick-access to tools, electronics, or nutrition.
This rear mount hydration system mounts to standard 7mm saddle rails and sits flush to rear of saddle. Featuring an innovative elliptical arch clamp for tilt adjustability. - 14" adjustment for case to glide under saddles with a transition tab - Precision machined stamped 6061-T6 construction - Capacity to hold one (included) or two Profile Design Vise Kages - Weight: 200g
Profile Design's Aero HC Hydration System sports a sleek, aerodynamic design so you can stay hydrated and hidden from the wind. The bottle features an aerodynamic design and a removable nose so you can easily clean it.The integrated mount places your computer right where you can see it when you're in an aero tuck. With 35mm of width adjustment and independent fore/aft adjustment for the bottle cage, the Aero HC Hydration System is a key part on your aero bike.
Designed and engineered specifically for the Vuka BTA mount, the Zipp Vuka Carbon BTA bottle cage is constructed completely from UD carbon fiber, for low weight and strength, as well as super secure bottle fitment. It's engineered to virtually eliminate bottle launch.
Profile's Axis Karbon Kage is kutting edge! Tipping the scales at just 33 grams, this is one of the lightest cages available. And, the carbon’s fine grip prevents bottle launch no matter where you mount the Kage. Plus, it adds a sweet look to your prized ride!
Zipp's Vuka Alumina BTA Mount with QuickView is cleverly designed to sit between the arms for aerodynamic efficiency while riding. The 104-gram, rock-solid aluminum mounting frame includes a QuickView quarter-turn mount for all Garmin Edge series head units, and is compatible with Zipp's Vuka BTA Carbon Water Bottle Cage (each sold separately). Mounting hardware is laser etched with a precision alignment scale, allowing wide-range adjustability so you can focus on the road ahead.
An absolute masterpiece, this cage screams style. The Fly Cage Carbon’s clean lines and hand-painted edges really stand out. No cage outperforms the Fly Cage Carbon with LockTight wings, which hold bottles securely while keeping them accessible. - 100% 3k Carbon - LockTight Wings - Hand-painted - Road and MTB approved - High-end and durable
Blackburn's Cinch Carbon Cage embodies an elegant and sleek design that has a firm grip to keep your bottles cinched down. - UD Carbon Fiber - Uni-Directional carbon fiber material allows for maximum strength, and minimal material for ultimate weight savings - Bottle Retention - There is nothing worse than looking down at your bike and realizing that you have one less water bottle than you started with. Our cages are vigorously lab AND field tested at each stage of the development process to ensure that your water is safely held to the bike. Details: - Black Matte is the lightest color/finish combination. Weight may vary up to 3 grams between other colors/finishes. - Two mounting bolts included Dimensions: - Length 140mm/5.51in - Width 78mm/3.07in - Height 78mm/3.07in - Weight-16g/0.04lbs
Give your pack a lower center of gravity with the brand new Crux LR reservoir. It delivers 20% more water per sip while keeping weight positioned low on your back, which translates to better stability in the saddle and on the trail. The Crux delivers 20% more water with every sip, plus an on/off lever that seals your tube shut when you’re not drinking. CamelBak also upgraded the fill-port design to include an ergonomic handle and a redesigned a cap that’s more intuitive and easier to fill—small changes that make it that much easier to fill up and hit the road.
Profile Design's Aero HC Bottle features an aerodynamic design so you can stay hydrated without sacrificing your position or speed. A flip up cap means easy refilling on the go, and the removable nose makes it easy to clean the bottle after the ride. The straw shroud is aero as well, so nothing about this exceptional piece of kit will hold you back in your quest against the clock.
This is the rebirth of Blackburn's successful Camber Cage. Built tough to withstand MTB abuse, yet elegant enough to pop on your road bike, the Camber Cage pulls double duty, and looks good doing it. - Different color and finish options lets you pick a cage to match your bike - UD Carbon layup provides a smooth finish that reflects current carbon frame designs - "Rib cage" retention design hugs your bottles securely - Flared top opening assists with aligning your bottle to the cage while on the fly - 30 grams
Features - UD carbon fiber - Specifically designed for the performance rider - Super lightweight at just 14g
- Offers 20% more water per sip - Leak-proof cap is easier to open and close - On/off lever lets you seal your drinking tube shut with one hand - Hydroguard technology inhibits the growth of bacteria in the reservoir and tube - Big bite valve self-seals after each drink, eliminating annoying drips - Dimensions: 46 x 23 x 8 cm / 18 x 9 x 3 in
The Aero HC Bracket Kit from Profile Design lets you attach a water bottle and computer mount in between your aero extensions. It fits aero extensions from 85mm to 120mm wide so you can use the bars of your choosing.
Fit for fondos, ready for races The carbon construction of the Pro Carbon Water Bottle Cage provides climbers with a lightweight solution that securely holds bottles over train tracks, rough roads, and rocky terrain. Ideal for both road and mountain bikes and available in a multitude of colors to suit your style. - Full carbon construction - Secure bottle retention suitable for road and mountain use - Includes lightweight alloy mounting screws - Available in a variety of colors - Weighs only 29g
Integrated stainless steel storage bracket that fits under a bottle cage. Holds included Twin Speed Drive CO2 head, V5 multi tool, and two Matrix levers. It will also hold two CO2 cartridges (sold separately). - Weight: 95g /311g Loaded
The Crux delivers 20% more water per sip, with an ergonomic handle for easier refilling, and an on/off lever that makes it easy to prevent leaks. - Offers 20% more water per sip - Leak-proof cap is easier to open and close - On/off lever lets you seal your drinking tube shut with one hand - Hydroguard technology inhibits the growth of bacteria in the reservoir and tube - Big bite valve self-seals after each drink, eliminating annoying drips - Dimensions: 38 x 19 x 6 cm / 15 x 7.5 x 2.5 in
The B-Tab is a low-profile horizontally-mounted BTA (between the arms) system. It features the versatile Side Axis Kage which allows riders to choose either a left or right side bottle release. The system can support both standard water bottles and the Aero HC. Alternatively, the system can be rotated to mount a standard bottle vertically. A hinged bracket design allows for quick and easy install and removal. - Can be rotated to mount vertically - Compatible with 31.8mm basebar - Offset design provides fore/aft adjustment - Hinged bracket design for quick installation and removal - 10mm wide bracket
• Super lightweight carbon construction • Tubular carbon rails for a sleek look • Special rubber grommet secures all water bottles • Weight: 21 grams +/-
$25.00 - $53.99
An absolute masterpiece, this cage screams style. The Fly Cage Ano’s clean lines and laser etched design really stand out. No cage outperforms the Fly Cage Ano with its LockTight wing design, that holds bottles securely while keeping them accessible. - 100% anodized aluminum - LockTight Wings - Laser etched design - Road and MTB approved - High-end and durable
Innovative design with side and bottle insertion/removal - Carbon injection bottle cage - Extremely light, 25 grams - Compatible with all frames, ideal for sloping tubes or small sizes
With Profile's Aqua Cell, your favorite drinks are just a straw sip away! This durable, injection-molded system features two chambers so you can optimize your hydration with multiple drinks. The main chamber holds 35 ounces and the secondary chamber holds 15 ounces. And, the top caps open easily for on-the-go refills. The Aqua Cell also slips easily into Profile's Airstryke and Century aero bars (sold separately).
With Profile's Aerodrink System you can stay in your aero position and stay hydrated. This durable, injection-molded 32-ounce bottle includes an extended straw for easy access, and its mesh plug is great for on-the-go refills. The Aerodrink also slips easily into Profile's Airstryke and Century aero bars (sold separately).
Small parts can be hard to keep up with. If you've lost pieces of the mounting hardware for your Speed Concept Water Bottle Cage, don't sweat it. You'll find all the replacement parts in this handy hardware kit. • Aluminum
Have you ever tried to grab a bottle from an aid station then dump it into your aero drink on the fly? That can get messy. Profile's HC Mount w/KA1 Cage allows you to attach a bottle cage in between your extensions so you can grab a bottle and have it within easy reach. It's an easy way to add more water carrying capacity to your bike.
Keep your water cold 4x longer! We re-engineered our legendary Podium Ice to be the ultimate insulated cycling bottle, even when temps rise into triple-digits. With unmatched aerogel insulation technology, high flow rate, and easy cleanability, the Podium Ice stands second to none. And like our entire Podium collection, it's 100% free of BPA, BPS and BPF and features improved cage fit and the squeezability that CamelBak is known for. - Aerogel Insulation: Keeps water cold 4x longer than other bottles - Optimized Cage Fit: Engineered to securely fit in a variety of bottle cages - Easy Squeeze: Get more fluid with less effort - High Flow, Self-Sealing Cap: Maximizes flow rate while eliminating splatters and spills - 100% free of BPA, BPS and BPF: Ride clean, drink clean - Easy-to-Clean Interface: All parts can separate for thorough cleaning - Positive Lock out: For leak-proof transport - Trutaste Polypropylene with Hydroguard: Taste your water and nothing else, time after time.
Page 1 of 4 Next page