Filter By:
- Parts & Accessories (57)
- Pedals (164)
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
- Show More Model Years
- Show Fewer Model Years
Pedals
$1,649.99
Designed for cyclists with exacting standards, X-Track Dual Power pedals are the perfect option to get the most out of each training session and race, whether you're riding an MTB or gravel bike. With a power meter inside each axle, they provide accurate data in all conditions, including the most extreme, and feature a market-leading weight/contact area ratio. Approved by experienced athletes, they are hard-wearing, reliable, efficient and Made in France: the perfect pedals on any terrain.
- Dual power transducers for accurate, comprehensive data
- An accurate power meter in a pair of efficient SPD compatible pedals
- Aluminum body, Stainless Steel platform and steel bearings
- Lightweight (404 g) with all-terrain efficiency
- Installed and set up in minutes
- Totally weatherproof and splashproof
- Standard Cleat included with 6 - 14Nm retention
- 3 year warranty
$1,499.99
Every watt counts, both under your shoes and on your computer. By integrating accurate power meters in our latest generation of carbon pedals, Look created the Keo Blade Dual Power. Easy fitting, lightest weight ever (260g a pair), maximum contact area and perfect aerodynamics: they provide outstanding performance as well as the option of analyzing your pedaling data in real-time. Train with precision and improve your performance with the best you can buy.
- Dual power transducers for accurate, comprehensive data
- Quick and easy installation in 30 seconds
- The top-level performance of Keo Blade, with the added benefit of a power sensors
- Best-in-class integration, ergonomics, durability and connectivity
- Robust mechanical and electronic architecture
- Carbon fiber blade body, Stainless Steel platform and steel bearings
- Keo Grip cleats with 16Nm retention and 6 deg float
- 3 year warranty
$1,129.99
For gravel or mountain biking, the integrated power meter of the X-Track Single Power pedals allow you to optimize your effort, then to analyze your training and race data. Featuring an outstanding weight/contact area ratio, they are incredibly efficient on technical rides and designed to withstand the toughest conditions. A simple, reliable and accurate tool to measure your effort, combined with SPD-compatible pedals offering outstanding performance.
- Single power transducer for accurate, comprehensive data
- An accurate power meter in a pair of efficient SPD compatible pedals
- Aluminum body, Stainless Steel platform and steel bearings
- Lightweight (404 g) with all-terrain efficiency
- Installed and set up in minutes
- Totally weatherproof and splashproof
- Standard Cleat included with 6 - 14Nm retention
- 3 year warranty
$999.99
The latest generation of Keo Blade clipless road pedals now adds a new dimension to your training thanks to a power meter. Perfectly integrated inside the left pedal axle, it measures and transmits your watts and cadence in real-time. Born from of expertise and experience at the highest level, they offer outstanding dynamic performance: ultra-lightweight (260g/pair), wide contact area and great aerodynamics. An essential, straightforward, reliable and easy-to-use tool to optimize your performance when training and racing.
- Single power transducer for accurate, comprehensive data
- Quick and easy installation in 30 seconds
- The top-level performance of Keo Blade, with the added benefit of a power sensor
- Best-in-class integration, ergonomics, durability and connectivity
- Robust mechanical and electronic architecture
- Carbon fiber blade body, Stainless Steel platform and steel bearings
- Keo Grip cleats with 16Nm retention and 6 deg float
- 3 year warranty
$699.99
Crank Brothers' Candy 11 is the pedal to sate a racer's sweet tooth. This customizable pedal boasts integrated traction pad technology to refine fit, feel and power transfer, while titanium components shave weight. A ribbed body helps your foot grab the pedal body when you've unclipped, though the four-sided entry will have you engaged and off on the first try. Rely on chamfered edges to reduce rock-strikes, and a hex alloy end cap bash guard to help minimize damage to the pedal body.
$699.99
Crank Brothers' Eggbeater pedals are 4-sided, making them super easy to enter and exit. Their open design makes them shed mud and debris quickly, and they feature 6-degrees of knee-friendly float. The Eggbeater 11s boast titanium axles, wings, and bodies, stainless-steel springs, and inner needle bearings. Crank Brothers has also made the Eggbeater internals water-tight for excellent durability and consistently smooth pedaling.
$625.00 - $640.00
The XPRO 12 SL is the ultimate expression of pedal technology, making it TIME’s lightest and most ergonomic road pedal. The XPRO 12 SL’s carbon body and proprietary design create a powerful structure to transfer power from your legs to the road. Power transfer and stability are enhanced with a larger pedal surface area of 725mm-squared compared with the already large surface area of the XPRESSO at 700mm-squared. The ICLIC system, with its pre-opened design, allows for positive engagement and greater comfort. This pedal combined with the ICLIC Float Cleat allows float (angularly and laterally) while clipped in, reducing knee strain. TIME XPRO pedals offer three options for spindle length to provide riders with more ergonomic options. Finally, the XPRO 12 SL features watt-saving ceramic bearings and a super light hollow titanium spindle, resulting in an overall weight of 87.3 grams per pedal. The carbon blade is also adjustable in three positions to optimize engagement tension. The pedal’s low stack height keeps the cyclist’s sole as close to the center of the pedal axle as possible, which, along with the large pedal surface area, results in incomparable pedaling efficiency and comfort. We recommend a maximum weight of 90kg.
- TIME’s ultimate road performance pedal, designed to be aero and light weight
- Carbon fiber body with hollow titanium spindle and ceramic bearings
- Fast and easy cleat engagement with three tension settings of the carbon blade
- ICLIC Float Cleat allows float angularly and laterally while clipped in
- Low stack height for good clearance
- ICLIC Cleats included
$510.00
The Speciale 12 is the ultimate balance between aesthetics and performance. This grippy, lightweight, and strong pedal was developed for the demands of professional enduro, trail, and more. The Speciale 12 features an alloy anodized platform, titanium spindle, and is available in two sizes: Large (69x90mm) for downhill and Enduro, or Small (64x80mm) for trail or Enduro. The pedal is spring-retention adjustable (micrometric) to exceed the demands of the most advanced riders. The Speciale 12 features TIME’s renowned ATAC design for easy entry and mud clearance. TIME’s renowned engagement system allows easy engagement with a positive, predictable entry and release.
- Premium design and performance in all conditions for enduro, trail, and downhill
- Alloy platform body with titanium spindle
- Easy engagement and performance in all conditions
- ATAC cleat design clears mud with every step-in
- ATAC Standard Cleats included
$484.99
The Crank Brothers Mallet E 11 is the premium version of the ideal enduro racing pedal. The specs say it all.
- Titanium wings to reduce weight
- Dual chamfered edges to reduce rock-strikes
- Exclusive double-anodized black and gold colorway
- Concave platform for secure foothold
- 6 adjustable pins per side for grip
- Traction pad technology to optimize the shoe/pedal interface
- Ribbed body for better traction when unclipped
- 52mm q-factor for maneuverability on tight trails
- Hex alloy endcap for durability
- 4-sided entry / superior mud shedding
- Customizable float & release angle
- Premium bearings & double seal system
$430.00 - $445.00
The XPRO 12 is the go-to pedal for top racers, thanks to its light weight and ergonomic design for countless hours of riding without pedal-induced discomfort. With its carbon body and titanium axle, the XPRO 12 is wildly light but robust. The pedal’s large 725mm-squared surface area provides efficient power transfer and vital stability, so you’re ready for sprints and explosive efforts. The pedal’s bottom fairing helps improve aerodynamics and protect the carbon blade. TIME’s patented pre-opened ICLIC system allows for fast and easy cleat engagement, so you are fast off the line. This pedal combined with the ICLIC Float Cleat allows float (angularly and laterally) while clipped in, reducing knee strain. TIME XPRO pedals offer three options for spindle length to provide riders with more ergonomic options. Tension adjustment on the carbon blade has three positions to precisely manage the pressure of the clamping mechanism. The XPRO 12 uses a titanium axle for a maximum rider weight of 90kg.
- Light, ergonomic, aero performance pedal
- Carbon fiber body with titanium spindle
- Fast and easy cleat engagement with three tension settings of the carbon blade
- ICLIC Float Cleat allows float angularly and laterally while clipped in
- Low stack height for good clearance
- ICLIC Cleats included
$430.00
The ATAC XC 12 is TIME’s lightest off-road pedal, purpose-built for quick windup and trail speed. This premier XC pedal is also designed for your comfort thanks to an ergonomic design, starting with simple clip-in thanks to a wide-angle of positive cleat engagement. Once you’re clipped in, the features of ATAC XC 12 really kick in: Freedom of movement, lateral and angular, for reduced injuries and muscle fatigue. The pedal’s self-cleaning design clears mud and debris each time you step in. Light and strong with a titanium axle and carbon body, ATAC XC 12 offers easy and consistent engagement with tension adjustment to meet your pedal preference and needs. This pedal is ideal for gravel and cyclocross as well.
- Designed for performance in off-road conditions; Ideal for cross country, gravel, or cyclocross
- Carbon fiber body with titanium spindle for light weight
- Easy clip-in and pedal engagement with self-cleaning ATAC cleat design that clears mud with every step-in
- Tension adjustment
- ATAC Standard Cleats included
$384.99
The Vault Mag SL MTB flat pedals are born from DMR's quest for production methods that are more environmentally friendly and less wasteful. Thanks to the unique use of pressure die-casting technology, the Vault Mag SL achieves these goals. The combination of lightweight magnesium body and Ti Nitride axle equates to just 332g per pair. When weight and performance are paramount, the Vault Mag SL mountain bike pedal delivers.
- ED Painted black finish
- Tried and tested at pro level
- 17mm concave footbed
- Titanium Nitride Axle
- High Load DU bush system
- Replaceable steel pins
- Rider weight limit 187lbs
$384.99
Ride with rage without compromising safety. This is what best defines the X-TRACK EN-RAGE, our top-of-the-line enduro pedal. The PLUS Ti model features a titanium axle for added strength and improved stiffness all while shaving grams. The wide, forged aluminum body on all PLUS models will increase stability and support across the most challenging terrain.
- Technology: X-Track
- Cleats: X-Track Cleat included (Easy Cleat available separately)
- Cleats standard: SPD compatible
- Retention: 6 to 14
- Body: Forged Aluminum
- Spindle: Titanium
- Platform area: 664mm²
- Platform width: 67mm
- Stack height + cleats: 16.8mm (10.7 + 6.1mm)
- Weight (pedal): 200g
- Weight (pair + cleats): 450g
- Float angle: 6°
- Release angle: 13°
$374.99
The X-TRACK RACE CARBON Ti pedals are specifically created for the most unforgiving courses. The mechanism is designed for easy engagement in all conditions and helps to shed mud and debris when clipping in. The carbon body offers a large contact area, while the titanium axle ensures the pedal is stiff and light: a mere 145 grams underfoot.
- Technology: X-Track
- Cleats: X-Track Cleat included (Easy Cleat available separately)
- Cleats standard: SPD compatible
- Retention: 6 to 14
- Body: Carbon
- Spindle: Titanium
- Platform area: 515mm²
- Platform width: 60mm
- Stack height + cleats: 16.8mm (10.7 + 6.1mm)
- Weight (pedal): 145g
- Weight (pair + cleats): 340g
- Float angle: 6°
- Release angle: 13°
$374.99
- Excellent Pedaling Efficiency
- Optimized Balance Of Weight And Rigidity
- Injection Molded Carbon Composite Body
- Hollow Cleat Bolt
- Efficient Power Transfer
- High Stability
- Extra-Wide Platform
- Efficient Power Transfer/Durability
- Reduces Flex And Pedal Body Wear
- Stainless Steel Body Plate
- Excellent Pedaling Efficiency
- Smooth Rotation
- 2-Ball Bearing, 1-Wide Roller Bushing
- Reliable Durability Performance
- Stable And Uniform Load Distribution
- Wide Bearing Placement
- Rider Tune
- Customize The Entry And Release Tension Settings
- Adjustable Entry And Release Tension Settings
- Shimano 3-Year Limited Warranty
- Average Weight: 224g
- Shimano SPD-SL cleats included
- Standard (52mm)
- Wide (56mm)
$349.99
The PEMBREE R1V elevates the platform pedal to a whole new level of performance and durability. The replaceable Traction Rails and Pins combined with the concave pedal body provide unrivaled grip and support for the rider.
The SKF sealed ball and needle bearings will provide many years of maintenance-free riding and a dedicated spindle seal will keep even the worst of the winters out.
All Traction Pins, bolts, and nuts as well as the spindle are stainless steel providing strength and corrosion resistance.
$315.95
Wolf Tooth Ripsaw Aluminum Pedals feature a slim, lightweight design with a slight convex profile. The large, asymmetric machined aluminum platform provides strong foot support for all-mountain riding, while the thin convex profile is just 7mm thick at the leading edge. Inside the pedal are three fully sealed cartridge bearings, a stainless steel axle, a igus bushing, and a custom radial seal to protect internal components against trail debris.
Slim Convex Profile
Ripsaw pedals are 12.5mm thick in the center and just 7mm thick in the front and rear edges. This profile is supportive and comfortable for all riders, while performing exceptionally well for riders who prefer pedaling with a mid-foot position or for shoes that do not have much structure or support.
Extra Grip
Each side of the pedal has 12 stainless steel rear-loading 4.5mm pins for loads of traction. An additional six 4.5mm pins ship with the pedal. Shorter 3mm pins are available as replacement parts to customize the convexity of the pedal; by installing shorter pins on the edges, the convex profile is emphasized.
Formed with Purpose
The slight convex profile of the pedal body is tallest at the pedal spindle. The shape then tapers toward each edge from there. This profile aligns perfectly with the arch of your foot and provides a strong platform for power transfer.
Reliable Performance
Three low-friction, fully sealed cartridge bearings and one igus bushing with a custom radial seal protect internal components against trail debris for riding in all conditions.
Precision Machining
Each Ripsaw Aluminum Pedal body begins as a billet of raw aluminum. After 37 minutes in our CNC mills, the result is a beautifully crafted pedal body that is ready for anodizing and assembly. If you’re a nerd for machining, you’ll appreciate the intricate gradients and machine paths.
$315.95
Wolf Tooth Waveform Aluminum Pedals are designed for all-mountain riding, from XC to downhill. They are engineered to lock in your foot with a shape that matches your shoe, rear-loading pins for grip, and a dual-concave profile to further cradle your feet. The pedals come in two sizes, and are proportionally scaled to provide a supportive platform shaped to match the footprint of your shoe. Large is 112mm x 106mm, small is 105mm x 99mm.
Dual-Concave Profile:
- Waveform pedals are 14mm thick on the perimeter and just 12.5mm thick in the center. This profile cradles your foot, front to back and side to side.
Extra Grip:
- Each side of the pedal has 11 stainless steel rear-loading pins for loads of traction. An additional six pins ship with each set of pedals and they are available as replacement parts.
Shaped with Purpose:
- The shape of Waveform Aluminum Pedals matches the footprint of your shoe
Reliable Performance:
- Three low-friction, fully sealed cartridge bearings and one igus bushing with a custom radial seal protect internal components against trail debris for riding in all conditions.
Tapered Edges:
- Large, tapered leading edge to deflect pedal strikes on rocky, rooty terrain
Two sizes:
- Large: 112mm x 106mm - 384g
- Small: 105mm x 99mm - 373g
Each size is proportionally scaled to match the silhouette of your shoe based on foot size or pedal size preference.
$199.99 - $279.99
This set of pedals aims to provide a large platform, thin profile, durability, tune-ability and serviceability. Ideal for anything from all-mountain, to downhill, to snow.
- 105x115mm pedal body
- 17mm concave foot bed
- Extruded 6061 aluminum body and 4140 chromoly steel axles
- High-load DU bushing and cartridge bearing
- 11 pins per side and 7 of which can be flipped to fit short- or long-way to fine tune the amount of grip desired
- 9/16"
$279.99
Shimano Ultegra R8000 pedals.
- Pro-level performance and lightweight for the enthusiast
- The legacy of Shimano design, quality and performance
- Carbon-composite body
- Extra-wide platform for a more efficient transfer of power
- Adjustable entry and release tension settings
- 4mm longer axle available
- Low stack height
- 0.7mm lower than PD-6800
- Model Number: PD-R8000
- Series: Ultegra
- Pedal System: SPD-SL
- Average Weight: 248 grams
$269.99
What if you could take control of gravity? Lean into the bend as far as possible without losing contact with the trail, or fly over doubles with ease? Designed alongside our top athletes to push the limits of grip and control, our TRAIL ROC PLUS flat pedals feature a wide, concave forged aluminum platform and high-resistance axles for perfect stability and unparalleled toughness. With 10 adjustable aluminum pins and a 16mm profile height, they keep you glued to your bike through curves, jumps and technical sections. Make every run a new challenge!
$269.00
We believe the best components should perform while going unnoticed and designed the Daemon flat pedal with this in mind.
The pedal features a gentle 2mm platform concave and a total concave of 7mm with our 5mm long, stainless steel pins. While not the largest pedal on the market, the 112mm long and 103mm wide platform with a gentle taper to the outline provides a large contact area while minimizing pedal strikes, and remaining comfortable and supportive.
Precision CNC Machined in Whistler, BC.
Specifications:
- Actual dimensions: 112mm x 103mm
- 2mm of true pedal body concave per side - 14.75mm thick at the axle, 16.75mm at the front and rear of the pedal.
- 5mm long custom stainless steel pins with M4 thread (20 per pedal) create a total 7mm concave.
- Double-sealed axle - VG style shaft seal with X-ring.
- Two stainless steel, sealed Enduro cartridge bearings (outboard) and an igus bushing inboard.
- Nitrox-coated axle
- Weight: 438g (pair)
$260.00
The Speciale 10, while inspired by the premium Speciale 12, stands on its own as a high-performance pedal. This pedal is up to the challenge of whatever downhill, Enduro and trail riding throws your way. Pick from two sizes: Large (69x90mm) for downhill and Enduro, or Small (64x80mm) for trail or Enduro. Grippy and durable, the Speciale 10 features an alloy anodized platform and oversized hollow steel spindle. The pedal is spring-retention adjustable (micrometric) to meet the demands of advanced riders and features TIME’s ATAC design for easy entry, predictable release, and mud clearance for reliable performance in all conditions.
- Designed for performance in all conditions for enduro, trail, and downhill
- Alloy platform body with hollow steel spindle
- Easy engagement and performance in all conditions
- ATAC cleat design clears mud with every step-in
- ATAC Standard Cleats included
$259.99
Competition-oriented and customizable for refined fit, feel, and power transfer.
Details
- Durable alloy body
- Durable cast steel wings
- Integrated traction pad technology to optimize the shoe/pedal interface
- Ribbed body for better traction when unclipped
- Chamfered edges to reduce rock-strikes
- Hex alloy endcap and bashguard
- 4-sided entry / superior mud shedding
- Customizable float & release angle
- Premium bearings & double seal system
Specs
- Body Material: 6061-T6 aluminum
- Cleats: Premium brass cleats with shims included
- Endcap: Hex alloy
- Inner Bearing Type: Igus LL-glide bearing
- Max Rider Weight: No restriction
- Outer Bearing Type: Enduro cartridge bearing
- Q-factor: 52mm
- Release Angle: 15° / 20°
- Spindle Material: Forged scm 435 chromoly steel
- Spring Material: 300 series stainless steel
- Warranty: 5 years
- Weight: 320g per pair
- Wing Material: 17-4PH stainless
$259.99
Crank Brothers Mallet DH, the choice of DH world champions.
- Concave platform for secure foothold
- 8 adjustable pins per side for grip
- Traction pad technology customizable interface
- Ribbed body for better traction when unclipped
- Chamfered edges to reduce rock-strikes
- 57mm q-factor for stability at speed
- 4-sided entry / superior mud shedding
- Customizable float and release angle
- Premium bearings and double seal system
- Spindle material: Forged scm 435 chromoly steel
- Body material: 6061-T6 aluminum
- Wing material cast: Stainless steel
- Spring material 300 series stainless steel
- Release angle 15° / 20°
- Max rider weight no restriction
- Q-factor 57mm
- Inner bearing type IGUS LL-glide bearing
- Outer bearing type enduro cartridge bearing
- Cleat premium brass cleats with shims included
- Adjustable pins 8 per side for grip
- Endcap hex alloy
- Weight: 479 grams
$259.99
The official pedal of 2x DH World Champion Loic Bruni.
- Designed with 2x World Champion Loic Bruni
- Asymmetrical double-anodized red & blue colorway
- Concave platform for secure foothold
- 8 adjustable pins per side for grip
- Traction pad technology customizable interface
- Ribbed body for better traction when unclipped
- Chamfered edges to reduce rock-strikes
- 57mm q-factor for stability at speed
- 4-sided entry / superior mud shedding
- Customizable float & release angle
- Premium bearings & double seal system
$259.99
Get a little more ankle room with this long-spindle version of Crank Brothers' Mallet E pedal.
- Concave platform for secure foothold
- 6 adjustable pins per side for grip
- Integrated traction pad technology to optimize the shoe/pedal interface
- Ribbed body for better traction when unclipped
- Chamfered edges to reduce rock-strikes
- 57mm q-factor for increased shoe clearance and control
- 4-sided entry / superior mud shedding
- Customizable float & release angle
- Premium bearings & double seal system
$259.99
For enduro riding and racing, it's all about the Crank Brothers Mallet E pedals. Winner of a Design & Innovation Award for 2016, this pedal features a concave platform for a secure, grippy foothold, and six adjustable pins per side for even more security. The adjustable traction pad interface keeps you in contact with the pedal so you can focus on your line. Four-sided entry ensures your foot will catch quickly and easily, as well as helping the Mallet E shed mud like no other. A 52mm q-factor is your best friend on tight trails, because who wants to be clotheslined by a tree? Not you, that's for sure. Throw in chamfered edges to ward off rock strikes, and a customizable float and release system and you're ready to shred.
Specifications:
- spindle material: forged scm 435 chromoly steel
- body material: 6061-T6 aluminum
- wing material: 17-4PH stainless
- spring material: 300 series stainless steel
- release angle: 15° / 20°
- q-factor: 52mm
- inner bearing type: igus LL-glide bearing
- outer bearing type: enduro cartridge bearing
- adjustable pins: 6 per side for grip
- endcap: hex alloy
- cleat: premium brass cleats with shims included
- weight: 419g per pair
$259.99
Full suspension or entirely rigid, upon a mountain top or deep in the woods, it’s up to you to define your trail. The Mallet Trail pedal fills the missing piece in Crankbrother's clip-in range, sitting perfectly between the Candy and Mallet E pedals. Equipped with a long spindle for stability and speed, two adjustable pins per side for added traction, and their eggbeater system with 4-sided entry and superior mud shedding, the Mallet Trail is ready to join you on your next adventure.
- Optimized platform size and surface for trail/gravel riding
- Long spindle, 57mm q-factor for more shoe clearance and stability at speed
- Integrated traction pad technology to customize and optimize the shoe/pedal interface
- 2 adjustable pins per side for grip
- Hex alloy endcap for durability
- 4-sided entry / superior mud shedding
- Customizable float & release angle
$259.99
The ultimate weight-saving upgrade.
- The kit includes: 1 pair titanium spindles + refresh kit (Enduro cartridge bearings, Igus ll-glide bearings, DSS double seal system: internal and external seals, hex alloy end caps, o-rings, nuts, sleeve bushings, & bearing removal tool).
- Compatible with: Eggbeater, Candy, Mallet, 5050, Double Shot, model years 2010-present
- Weight: 60g per pair
- Spindle material: 6al/4v titanium
- Max. rider weight: 200lb/90kg
- Q-factor: 52 mm
Page 1 of 8
Next page