Parts & Accessories

For added protection in aggressive terrain, you have the option to add this removable, lock-on Super 3R chin bar to your Bell Super 3 Helmet (sold separately).

The replacement lens for your Aerohead helmet featuring premium ZEISS Optics and a choice of either grey (for sunny/mixed conditions) or clear (for low light racing and training). The magnetically fastened ZEISS optical shield provides wraparound eye protection with exceptional optical clarity, and it's easy to flip up or remove with one hand when appropriate.

- Mud and splash protected - Foam padding for additional protection - Simple to access - Can be attached to back pack

- Mud and splash protected - Foam padding for additional protection - Simple to access - Can be attached to backpack

- Women's Premium EPS Winter Liner w/ Boa Adjuster - For Lenox, Brighton

- Women's Premium Zipmold Winter Liner w/ Boa Adjuster - For Berkeley

- Men's Premium EPS Winter Liner w/ Boa Adjuster - For Watts, Baker, Macon - Old version Double-sizing: S/M (54-57cm), L/XL (57-60.5cm), 2XL-3XL (60.5-63.5cm) - New vesion Single sizing: S (54-55.5cm), M (55.5-57cm), L (57-59cm), XL (59-60.5cm)

You need to get out on your bike even in terrible weather. Fitting in an early commute or a mid-winter ride is easier when you're warm, comfortable, and visible. Keeping your head warm in bad weather can be the best way to fend off the elements. - Reflective logo - GORE-TEX Product: durably waterproof, windproof and extremely breathable - Reflective band on front and back - Elastic hem - Embedded silicone grippers at top edge - Reflective transfer print to mark right and left - Zipper with semi-lock slider and reflective piping on lateral hem - Reflective logo - Sizing: Medium: 54-58cm, Large: 60-64cm

Upgrade any summer Bern helmet with added warmth and comfort for cold weather riding. Water and wind resistant. Stretch Lycra custom fit. Breathable top beanie material.

Looking for a great around town lighting system at a very reasonable price? The Duplex is just that. Providing both headlight and rear light in one unit, the Duplex easily mounts to your helmet with an included rubber strap and provides up to 100 hours of run time on only two AAA batteries. The light is easy to operate and can be switched between constant beam and flashing modes simply by pressing and holding a button. Making yourself visible in city traffic can help motorists see you better, and a good helmet-mounted light that is worn on your head, up and away from the distraction of car lights, can really make you stand out in a sea of vehicles. Use your head, and use a light. Features - Dimensions: 70.5 x 28.5 x 23 mm - Weight: 51.5 g (with bracket and batteries) - Light source: White LED x1, Red LED x1 - Battery: AAA alkaline battery x2 - Mount: Rubber band (Long) Modes/Run Time - (Front) Constant mode (15 lumens): 100hrs - (Rear) Constant mode (10 lumens): 100hrs - (Front) Flashing mode (30 lumens): 100hrs - (Rear) Flashing mode (10 lumens): 100hrs

Freshen up your iXS Xult helmet with this lining replacement.

The Asteroid fits all new and older Bern helmets with a two-hole mount located in the rear of the shell. USB rechargeable. - 12 Lumens - Micro USB rechargeable - 3 Light Modes (Flash 24 hours, Pulse 6.5 hours, Steady 5.5 hours) - Water Resistant - 16 grams - 26mm tall, 39mm wide, 20mm thick (w/o bracket)

Key features - Original equipment replacement Boa System for your Bontrager helmet - Compatible with all Boa-equipped Bontrager helmets, except Velocis MIPS - Can also be used to upgrade your Headmaster-equipped Bontrager helmet to the Boa System

Key features - Original replacement Boa System for your Bontrager Velocis MIPS helmet - Not compatible with any helmets except the Bontrager Velocis MIPS with the Boa System

Replacement fit systems keep you comfy and secure Fit systems work hard to keep your helmets secure and to maximize safety. No matter what happens, these original replacements will get them working like new - Original equipment replacement Boa System for your Bontrager WaveCel helmet - Not compatible with non-WaveCel helmets - Full-length fit system designed for use with Medium and Large sized helmets - Short length fit system designed to optimize the fit of Small sized helmets

EPR Cheek Pad Replacement Set for Xult Helmet

For CubiCubi 500 / 850 / 1200 - Single Box Light Mount & Straps - Battery Mount

New pads help your helmet fit best and smell fresh Let's face it—we all sweat. Sweat stinks. Fresh pads will make your helmet smell, and fit, just like it did when it was new. - Original equipment replacement fit pads for your Bontrager Blaze WaveCel helmet - NoSweat keeps sweat out of eyes through channeled pads for constant clarity - Helmet fit pads should be replaced once a year to maintain fit and hygiene

New pads help your helmet fit best and smell fresh Let's face it—we all sweat. Sweat stinks. Fresh pads will make your helmet smell, and fit, just like it did when it was new. - Original equipment replacement fit pads for your Bontrager XXX WaveCel helmet - NoSweat keeps sweat out of eyes through channeled pads for constant clarity - Helmet fit pads should be replaced once a year to maintain fit and hygiene

Replacement visor and pins for the iXS Xact helmet.

- Kid's Zipmold Warm Weather Liner - For Nino

Lights, Camera, You Name it The Accessory Mount is a great solution for attaching your GoPro-style mount to your helmet, seatpost, handlebar, selfie-stick or just about anything else. The banded system offers easy attachment, the 270 degree rotation helps you position your camera so that you can get the shot every time, and the omni-directional breakaway feature will take the hit in a crash (possibly saving your camera equipment). With the Accessory Mount, your imagination is the only thing holding you back. Features - Omni-directional breakaway, 270 Degree Rotation

EPR Cheek Pad Replacement Set for Xact Helmet

Freshen up your iXS Xact helmet with this replacement liner.

Easily integrated Designed specifically for specific Bontrager Circuit MIPS road bike helmets, the Blendr mount easily integrates Bontrager Ion lights and GoPro cameras. - Quickly mount front light and camera accessories on the front of your Bontrager Circuit MIPS road bike helmet. - Tested with an accelerometer for intended breakaway point if involved in a crash

Easily integrated Designed specifically for specific Bontrager Circuit MIPS road bike helmets, the Blendr mount easily integrates Bontrager Ion lights and GoPro cameras. - Quickly mount rear light to the back of your Bontrager Circuit MIPS road bike helmet - Tested with an accelerometer for intended breakaway point if involved in a crash

Add the safety of visibility to your helmet and light up the trail, road, or commute with help from the Bontrager Helmet Mount. Easily attaches a light to most helmets. - Works with all Bontrager Ion and Flare lights

Fit systems work hard to keep your helmets secure and to maximize safety. No matter what happens, these original replacements will get them working like new. - Original replacement fit systems for your Bontrager helmet - Compatible with all Bontrager helmets with Headmaster I or II fit systems

Let's face it - we all sweat. Sweat stinks. Fresh pads will make your helmet smell, and fit, just like it did when it was new. New pads can also help you dial in your perfect fit - keeping you comfortable and looking forward to the next ride. - Original equipment replacement fit pads for your Bontrager Lithos or Rally helmet - NoSweat keeps sweat out of eyes through channeled pads for constant clarity - Helmet fit pads should be replaced once a year to maintain fit and hygiene

New pads help your helmet fit best and smell fresh Let's face it—we all sweat. Sweat stinks. Fresh pads will make your helmet smell, and fit, just like it did when it was new. - Original equipment replacement fit pads for your Bontrager XXX WaveCel helmet - Helmet fit pads should be replaced once a year to maintain fit and hygiene