Filter By:
- Show More Brands
- Show Fewer Brands
- Show More Model Years
- Show Fewer Model Years
Stems
$849.99
An OCLV Carbon integrated road bike handlebar/stem with an ergonomic and aerodynamic shape.
POSITIONED FOR POWER
The Trek Aero RSL Road Integrated Handlebar/Stem is built upon our Race Fit, with a shorter reach and hoods that are 3cm narrower than the drops. This moves you into a more comfortable ergonomic riding position that greatly reduces rider drag for an e/tra aerodynamic advantage.
A 6-degree flare allows for ample wrist clearance and control, so you don't lose any power or comfort in e/plosive sprinting moments. Plus, riders get the weight-saving and aerodynamic advantage of a single-piece bar combined with stem.
PRODUCT DETAILS
- OCLV Carbon construction is ultra-light, compliant, and durable
- 7-degrees of ergonomic backsweep reduces rider drag for e/tra aerodynamic speed and comfort
- Hoods measure 3cm narrower than drops
- 6-degree flare provides ample wrist clearance for sprinting
- Brake lever position guides for spot-on control set-up
- Electronic shift compatibility only
- Only compatible with Madone Gen 8
- Race Fit puts riders into a more comfortable, ergonomic riding position
$494.99
An integrated handlebar/stem that delivers aesthetically pleasing performance in a lightweight package.
Lust worthy looks, elevated performance
Elevate your ride and upgrade to the Bontrager RSL MTB Handlebar/Stem for a super-clean one-piece carbon combo. This OCLV Carbon bar sets the benchmark for lightweight durability, and with Blendr allowing seamless integration of electronics, your cockpit has never looked or performed better.
RSL MTB Handlebar/Stem is compatible with both Knock Block and standard type headsets, so there's no excuse not to make the switch to this drool-worthy performance piece.
Product details
- OCLV Carbon construction is the benchmark for durability and light weight
- Compatibility with Knock Block and standard headset types (adapter included)
- Seamless accessory integration with Blendr (mounts sold separately)
- Shifter and brake lever position lines for spot-on control setup
- 40mm trim lines allow for a personalized fit
- Titanium hardware is lightweight and long-lasting
$484.99
Get back on the road with a genuine replacement stem.
Original equipment replacement stem for your Madone SLR.
PRODUCT DETAILS
- High fit stem is 7-degrees of drop
- Not compatible with other bikes
- For installation instructions, please see your Madone Assembly Manual
$484.99
Get back on the road with a genuine replacement stem.
Original equipment replacement stem for your Madone SLR.
PRODUCT DETAILS
- Low fit stem is to be used to create an H1 comparable fit
- Not compatible with other bikes
- For installation instructions, please see your Madone Assembly Manual
$429.99 - $430.00
- Compatible with Giant's proprietary Overdrive Aero steerer tube
- Ultra-light carbon composite reduces weight while optimizing the aerodynamic shape
- Integrated aero shape achieves maximum stiffness while attaining low weight
- Simplified cable management hides all the cables underneath the stem
- Weight (g)133/138/143/148/153/158/163/168
- Length (mm)80/90/100/110/120/130/140
- Angle±10°
- Bar Clamp Dia. (mm)31.8
- Stack Height (mm)40
$430.00
Engineered exclusively for OverDrive Aero steerer tubes, the Contact SLR AeroLight is an ultralight and stiff composite stem that offers aero-enhancing integration, easy-to-adjust cable management, and sleek looks.
FEATURES:
- Works with OverDrive Aero steerer tubes only
- Integrated aero design unifies the top cap, cables, and spacers with the head tube for improved aerodynamics
- Ultra-light composite design delivers maximum stiffness at a superlight weight
- Intuitive design guides all cables under and inside for optimized aerodynamics and sleek looks.
- Fits current generation Contact Aero or Contact D-Fuse handlebars
- Available in eight lengths from 80mm to 140mm
SPECIFICATIONS
- Weight: 123g (100mm)
- Length: 70/80/90/100/110/120/130/140mm
- Angle: -10°
- Bar Clamp Diameter: 31.8mm
- Steerer Tube Clamp Diameter: D-shaped OverDrive Aero, 1 1/4 inch
- Stack Height: 44mm
$419.99
Zipp's SL Speed stem represents the essence of carbon componentry. It's stiff, secure and light weight with a sleek design that compliments any bike. It's a perfect addition to a mountain climber's favorite feather-light road bike, but it's tough enough to tackle gravel and cyclocross. Designed using SRAM Exogram technology, found in SRAM RED cranks, the new SL Speed Stem weighs just 123g (100mm) while exceeding our stiffness-to-weight standards. The SL Speed is available in six sizes ranging from 70 to 120mm to meet any rider's fit needs. Includes stiff aluminum faceplate and titanium hardware Torx T25 heads for precise torque readings and ease of adjustment.
- Updated distinctive Zipp cosmetics
- Designed using SRAM Exogram technology
- New SL Speed Stem weighs just 123g (100mm)
- ±6° carbon stem
- Secure with four bolt faceplace using Torx T25 bolt heads
- Matte Black finish
- Lifetime warranty
- Zipp Quickview integrated mount available separately
$419.99
The SL Sprint Stem is an ideal balance of stiffness and lightweight. The stem weighs in at just 1.8g per newton meter of stiffness using SRAM's Exogram technology. Designed with feedback from top pros to meet the unrelenting demands of Grand Tour sprinters. Zipp also tapped into expertise gained from its pioneering carbon stems and exhaustively researched the marketplace to create the SL Sprint Stem. The SL Sprint comes with its own stem cap that's designed to be aerodynamically efficient by blending into the stem body. Available in six sizes, ranging from 90 to 140mm, to meet any rider's fit needs.
- Updated distinctive Zipp cosmetics
- Carbon Exogram construction delivers the stiffest stem on the market gram for gram.
- Secure with four bolt faceplace using Torx T25 bolt heads
- Matte Black finish
- Lifetime warranty
- Zipp Quickview integrated computer mount available separately
$389.99
An ultralight OCLV Carbon stem with flush-fit faceplate bands and Blendr integration for a clean look.
The lightweight stem for seamless integration
OCLV Carbon construction of the RSL Blendr stem combines lightweight strength with a classy aesthetic. It's equipped with captured titanium hardware that ensures you never drop bolts again, and the dual-banded faceplate shaves weight and works seamlessly with mounted accessories using the Blendr integration system.
Product details
- Ultra-light OCLV Carbon construction
- Flush-fit 4-bolt dual band bar clamps offer seamless look
- Captured Titanium screws save weight while making installation easy
- Integrate accessories with included Blendr Mono Base and Blendr Ion and Garmin mounts
- Mounts available for use with Ion and Trip, Garmin, GoPro, and SRM accessories
- Approved for carbon bars and steerer tubes
$374.99
OCLV Carbon construction of the XXX Blendr stem combines lightweight strength with a classy aesthetic. Captured titanium hardware ensures you never drop bolts again, and the dual-banded faceplate shaves weight and blends perfectly into mounted accessories with the Blendr integration system.
- Ultra-light OCLV Carbon construction
- Flush-fit 4-bolt dual band bar clamps offer seamless look
- Captured Titanium screws save weight while making installation easy
- Integrate accessories with included Blendr Mono Base and Blendr Ion and Garmin mounts
- Mounts available for use with Ion and Trip, Garmin, GoPro, and SRM accessories
- Approved for carbon bars and steerer tubes
$359.99 - $370.00
ULTIMATE PERFORMANCE
Featuring purpose-engineered shaping, Giant’s all-new Contact SLR Stem is stiff, strong and ultra-light. Available in ±10° and ±20° angles and eight lengths from 70 to 140mm, the Contact SLR stem accommodates a wide range of riders and is the perfect complement to the TCR or any other high-performance road bike. STIFF AND LIGHT
With purpose- engineered shaping, full-carbon Contact SLR stem offers maximum stiffness at minimum weight. Compared with the previous Contact SLR stem, the all-new Contact SLR road stem is 9% stiffer and 7% lighter. AERO INTEGRATION
The integrated stem cap of the all-new Contact SLR stem ensures a smooth flow of air over the top of the stem while the specifically designed shape of the spacers offers seamless integration and air transition over the side of the stem. VERSATILE FIT
Perfect for any elite rider, the Contact SLR road race stem is available in eight sizes, ranging from 70mm to 140mm, and 2 angles (±10°/ ±20°).
FEATURES
- Compatible with all Giant OD1 and OD2 head tubes sizes
- Available in ±10° and ±20° angles
- Available in eight lengths from 70 to 140mm
- Purpose-engineered shaping achieves maximum stiffness and lowest weight
- Integrated aero silhouette from stem cap to spacers
$349.99
Aero Design Stem
- Handlebar Diameter: 31.8mm
- Steerer Tube: 28.6mm
- Stem Material: Carbon
$349.99
LOOK Design Stem
- Handlebar Diameter: 31.8mm
- Steerer Tube: 28.6mm
- Stem Material: Carbon
$333.00
The perfect combination of stiffness, strength and reasonable weight.
- Made in Chico, CA with US sourced 2024 aircraft alloy
- High strength stainless steel T25 bolts
- 35.0mm bar clamp
- Stack height: 36mm
- 118g
$329.99
eeSilk Stem is a fatigue-reducing compliance stem that noticeably reduces vibrations on variable surfaces. With up to 20mm of tunable compliance, an easy single bolt external elastomer change and a soft/firm compliance switch – the eeSilk Stem makes any road, no matter the terrain, smoother.
- Weight: 225g - 235g
- Angle: -6° (only)
- Stack Height: 49mm
- Stem Clamp: 31.8mm
$329.99
Features
- Material: Ultra-light Aero carbon composite
- Length: 70mm / 80mm / 90mm / 100mm / 110mm / 120mm
- Fit: 31.8mm (OD2), shim 28.6mm (1 1/8") steerer tube
- Extra: Titanium hardware, +/-8° adjustable rise
- Weights: 135g, 138g, 141g, 146g, 149g, 154g
$224.99
- Fully CNC machined
- Featuring an oversize center bore
- Extensive machining and external webbing to maximize structural strength and stiffness and minimize weight
$224.99
- CNC machined 2014 aluminum body and 7075 aluminum clamps
- 240 degree wrap-around, twin plate clamping system
- External webbing to maximize structural strength
- 118-158g including stainless steel bolts
$224.99
- CNC machined 6082 aluminum body
- 7075 aluminum clamps
- Unique 240-deg C-shape clamps
- Minimal 6-bolt design
- U-shape cradle clamp eliminates handlebar stress raisers found with traditional stems
- Ultra-wide 64mm clamp width
$217.99
Every Profile Design product is perfectly optimized to minimize aerodynamic drag. So, it's no surprise that Profile's Aeria Stem has hidden bolts and a low profile faceplate to smooth oncoming air. The sculpted shape is constructed from strong, lightweight forged aluminum, and the 17-degree drop ensures an aerodynamic fit on your time trial or triathlon bike.
$189.99
A lightweight alloy stem with a flush mount top cap and seamless cable routing offer a fully integrated and elegant aesthetic.
Integrated elegance
The RCS Pro Blendr Stem is a sleek alloy stem offering all of the performance you crave, with looks to match. Specifically designed for use with model year 2023 Domane SL, SLR, and RSL bikes, this stem fits seamlessly with the headset top cap to provide ultimate integrated elegance. A flush mount top cap, under-stem cable routing cover, and Blendr compatibility further add beauty and sophistication.
Product details
- Lightweight 7075 alloy construction
- High-quality M5 corrosion-resistant face plate bolts with 5.2Nm torque spec
- Cable routing cover keeps up to six cables and wires tidy under stem
- Included Blendr Duo Base makes it easy to integrate accessories
- Blendr accessory mounts sold separately
- Compatible with model year 2023 Domane SL, SLR, RSL bikes
$184.99
Enduro has unquestionably evolved ever closer to Downhill. The Enduro MK3 Stem is all you need for hitting the trails with wingsuit type accuracy. This Stem was born out of rider's demands for precision and for those moments when you have to be inch-perfect.
Taking design elements from our World Cup-winning Direct Mount MK3 Stem and splicing these with our critically acclaimed Enduro MK2 Stem.
We developed the Stem specifically with Pro's and Bro's alike. It was obvious we all live for the same challenge of pushing our own limits. As riders, we want a Stem that inspires confidence to change lines through the middle of a rock garden like it's no big deal or slap the inside of a turn and translate all your weight to front-wheel traction. Providing ear-to-ear grins and saying to your mates at the bottom of a trail, "Did you see that?".
From the start of the design process, it became clear that we wanted extra rigidity. To yield this, we would need to make the Stem using a forging process - a new thing for us. The result of this allowed us to achieve a more intricate shape than machining alone. It involves applying a huge amount of force to redirect the grain flow of the material. As a result, this gives superior strength, fatigue and impact resistance.
Another area where we made a significant improvement in rigidity was by increasing the clamping surface area on the steerer tube. We've vastly increased this to give a stout, rock-solid feel and as close to the MK3 Direct Mount Stem as we could. Furthermore, everything is held securely by stainless steel bolts to ensure there is no rust even in the grimmest weather. In addition and like every Burgtec product, it's fully CNC machined and anodized in all your favourite flavours.
Tested with the world's fastest jibbers and sendiest racers, this stem has everything you need to hit all those rowdy racing lines or pull that little bit harder off that big sender.
- Forged and Fully CNC machined from AL6061 – T6 Aluminium
- Stainless Steel Hardware
- Available lengths - 35mm, 42.5mm and 50mm
- Available in both 31.8mm (Black only) and 35mm Clamp
- Weight: 35mm 138g, 42.5mm 152g, 50mm 160g
$176.99
Zipp's Service Course SL Stem, crafted from 7075 aluminum, features a shape that's strong and lightweight, resulting in a best-in-class 1.85 grams per newton meter of stiffness. That results in no-flex sprints and accelerations. This stem is a favorite of Zipp ambassadors and pro athletes.
- Distinctive Zipp cosmetics
- Zipp Quickview integrated computer mount available separately
- Lifetime warranty
$175.99
Entirely manufactured in the UK, this brand new stem combines precision engineering, function-led form and our trademark commitment to sustainability.
Custom-made stainless steel bolts ensure that the no-gap face plate is perfectly aligned; critical in protecting the handlebar and delivering strong, consistent clamping force.
Machined in our factory in the south of England. The VFS Stem body and face plate is made from UK-sourced aluminium that has a minimum of 75% recycled content, making this the most environmentally-friendly stem on the market.
Specifications:
- Stem: 75% recycled aluminium manufactured by PEMBREE
- Bolts: Custom UK-made stainless steel, manufactured by Precision Products
- Environment: Carbon Neutral
- Length: 35mm
- Handlebar: 35mm
- Rise: 0 degree
- Weight: 148g
- Warranty: 5 Years
- Certification: EFBE Tri-Test Certified
$170.00
After a delay, the king is back. We've updated the NSB Overlord stem to accommodate 35mm diameter handlebars. A wider clamp area and refined shape improve strength while retaining what we feel are the correct proportions. Still, light enough to pedal all day and strong enough to tackle full days in the Whistler Bike Park.
The 35mm diameter stem is available in 35mm and 40mm lengths and will be available in all colors for the smaller Overlord.
Specifications:
- Clamp Size: 35mm handlebar
- Fork Steerer Tube: 1 1/8?
- Rise: 0-degree
- Stack Height: 38mm
- Hardware: 8.8 Grade Gold Zinc plated M6 bolts
- Precision CNC Machined in Whistler, B.C.
Weight:
35mm – 190g
40mm – 196g
$169.99
Get back on the road with a genuine replacement stem.
Original equipment replacement stem for your bike.
PRODUCT DETAILS
- Includes face plate and face plate bolts
- Includes stem cap to cover your cables
- Steerer tube bolt not included
$164.99
Light and stiff alloy stem with Blendr accessory integration for road and mountain bikes.
The smarter upgrade
The forged alloy construction of the Bontrager Pro Blendr Stem delivers stiffness without compromising its light weight or sleek looks. Easy integration of lights, a computer, and more with the Blendr integration system make this stem a perfect upgrade for any bike.
PRODUCT DETAILS
- Pro-level quality 31.8mm clamp diameter stem weighs less than many carbon stems
- 4-bolt dual band clamp securely holds handlebar
- Uses high-quality M5 corrosion-resistant faceplate bolts with 5.2Nm torque spec
- Included Blendr Pro base and Blendr XXX accessory mounts make it easy to integrate accessories
- Mounts intended for use with Ion and Trip, Garmin, GoPro and SRM accessories
- Approved for carbon bars and steerer tubes
- Safe installation requires 5mm spacer above and below stem
- Included Blendr accessories: Pro Mono Base, Trip Computer mount, and High Ion Light mount
$154.99 - $159.99
The forged alloy construction of the Bontrager Pro Blendr Stem delivers stiffness without compromising its light weight or sleek looks. Easy integration of lights, a computer, and more with the Blendr integration system make this stem a perfect upgrade for any bike.
- Pro-level quality 31.8mm clamp diameter stem weighs less than many carbon stems
- 4-bolt dual band clamp securely holds handlebar
- Uses high-quality M5 corrosion-resistant faceplate bolts with 5.2Nm torque spec
- Integrate accessories with included Blendr Pro base and Blendr XXX accessory mounts
- Mounts intended for use with Ion and Trip, Garmin, GoPro and SRM accessories
- Approved for carbon bars and steerer tubes
- Safe installation requires 5mm spacer above and below stem
- Included Blendr accessories: Pro Mono Base, Trip Computer mount, and High Ion Light mount
$159.99
- CNC Machined from hard high grade 7075 T73 Aluminum
- 0 deg rise to keep you low and in control
- 69mm wide clamping platform for an incredibly stiff front end
- Intended Use: Downhill
$144.99 - $154.99
Strong, light, and capable
The Kovee Pro 35 stem is the perfect centerpiece for cross country race bike. This lightweight stem is optimized for the latest XC mountain bike standard, with a 35mm clamp diameter that combines with a 35mm handlebar to provide a stronger, lighter system.
An oversized 35mm clamp diameter MTB stem that offers increased strength and minimal weight
- Oversized 35mm clamp diameter offers increased strength and minimal weight
- 7075 T73, 3D, forged alloy construction
- Laser-etched calibration marks make dialing in the perfect angle simple and repeatable
- Compatible with both Knock Block and standard headsets and spacers
- Blendr compatible for an elegant, integrated accessory mounting solution
- Available in a wide range of sizes for today's mountain rider
- High-strength, corrosion-resistant steel bolts
- Approved for carbon bars
Page 1 of 4
Next page